Quantcast
Jump to content


Master Cutoff Issue (not alternator!)

Randy

By Randy
in Joyner UTV SxS Forum

 Share

Recommended Posts

Randy Explorer

Randy

Posted
Posted

After several successful days of driving, I noticed that my voltmeter was below 12 when previously it had always been above when engine was running (charging). Of course I was miles away and with a large group. I split away and hi-tailed it back to camp (Love my GPS!) just as I noticed the lights dim out and the tach start to fluctuate wildly.

Everything pointed to an alternator/regulator problem. Voltage at battery was 11.8vdc and falling even when engine was running. Voltage was present at the alternator. Starter engaged, engine ran, horn worked, etc., just no charge getting to the battery. Turns out that after I cycled the master cutoff switch many times (!) things returned to normal. Weird! Problem never reappeared and I did not touch the switch again to make sure it stayed doing what it was doing.

Two questions - 1) How can the master switch prevent charging but allow all other functions? 2) Do I replace the switch or eliminate it?

Randy.

Guest Lenny

Guest Lenny

Posted
Posted

I would think that with the engine running you could disconnect the battery. If the master switch were faulty, it would temperarily disconnect the battery but the alternator which if connected in after the master switch would run everything but the battery wouldn't charge. If you are out on trail, remember that you can easily bypass the master switch by moving the wire over.

Lenny

Kinarfi Veteran

Kinarfi

Posted
Posted

When Lenny & I were out one time, Lenny was going along fine until we stopped for a break, that was it for a while, His master switch key had broke and disconnected the battery. He had been running on the alternator only with no battery, I recommend carrying an extra key for the master switch, I made one out of steel, http://www.utvboard.com/topic/1830-dave-needed-master-electrical-switch-key/page__view__findpost__p__7536 I suggest you either get one or make a copy before the plastic one breaks. After rewiring my Trooper, the alternator goes to the start solenoid, then the master switch and then the battery. Not sure how you would lose the alternator and run off battery only unless you alternator just quit.

Kinarfi

  • 3 weeks later...
iltrooper Rookie

iltrooper

Posted
Posted

I too had a master switch problem. I store my T2 in a warehouse so when I was in there I would always start it and let it warm just to know all was well. For no reason one day it wouldn't start. It would roll over only. No spark or injector pulse, (checked with a GM noid) but lights and accessaries worked. Thinking ECM or at least crank trigger I towed it to my shop and started to check things. Why I did it I don't know, but I cycled the main kill switch and it started! Real RELIEF! Now if I could get past my axle problem,,,,,,,,,,

rocmoc Grand Master

rocmoc

Posted
Posted

I too had a master switch problem. I store my T2 in a warehouse so when I was in there I would always start it and let it warm just to know all was well. For no reason one day it wouldn't start. It would roll over only. No spark or injector pulse, (checked with a GM noid) but lights and accessaries worked. Thinking ECM or at least crank trigger I towed it to my shop and started to check things. Why I did it I don't know, but I cycled the main kill switch and it started! Real RELIEF! Now if I could get past my axle problem,,,,,,,,,,

Welcome! Thanks for filling out your profile. What is the problem you are having with your axle?

rocmoc n AZ

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • Sammy
      2017 TW450 Kohler ECH440 runs out of fuel when running wide open.
      By Sammy
      Runs fine just putting around the yard. Get it out on the road and about a half miles it runs out of gas. Let it idle for a few minutes and it will run for another half mile and do it again. Replaced both fuel pumps and filter. Does anyone know if I can get rid of the factory fuel pump?
    • Alex
      Polaris Giving Away a Custom 1776 Edition RANGER XD 1500 NorthStar UTV
      By Alex
      If you’ve been looking for a chance to score a brand-new UTV, Polaris just launched one of the most unique giveaways we’ve seen in years.
      To celebrate America’s upcoming 250th anniversary, Polaris has announced its Celebrate American Heroes Giveaway, offering one lucky winner a custom-built Polaris RANGER CREW XD 1500 NorthStar 1776 Edition along with an all-expenses-paid trip to Nashville, Tennessee.
      The giveaway isn’t just about winning a side-by-side. Polaris is encouraging people to nominate someone they consider an American hero—whether that’s a veteran, first responder, teacher, volunteer, tradesperson, community leader, farmer, healthcare worker, or simply someone who makes a positive difference every day. Entrants can nominate themselves or someone else by sharing their story and submitting a photo.
      What’s Included?
      The grand prize is a highly customized RANGER CREW XD 1500 NorthStar 1776 Edition featuring:
      Exclusive 1776 commemorative graphics and badging Custom American-themed design package JBL 4200 audio system 50-inch LED light bar Rear winch Additional factory Polaris accessories All-expenses-paid trip for the winner and a guest to Nashville, Tennessee to receive the vehicle in person at the Polaris Dealer Meeting. According to Polaris, fewer than 100 of these special-edition 1776 models will be produced, making it one of the more unique RANGER builds we’ve seen from the factory.
      Why the RANGER XD 1500?
      The RANGER XD 1500 NorthStar sits at the top of the Ranger lineup and is designed for serious work and recreation. With its enclosed cab, heating and air conditioning, premium comfort features, and heavy-duty capability, it’s become one of the most talked-about utility side-by-sides in the industry.
      Whether you’re using a UTV on the farm, around your property, hunting, trail riding, or for work applications, the XD 1500 is one of the most capable utility machines Polaris has ever built.
      Entry Information
      The giveaway is open to eligible U.S. residents 18 years or older. Participants must submit their nomination story and photo through Polaris’ official entry page. Polaris is accepting entries through early July, with the winner receiving the vehicle at a special event in Nashville this August.
      https://www.polaris.com/en-us/off-road/sweepstakes/celebrate-american-heroes/
    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • MilSurpYinzer
      Altering running lights
      By MilSurpYinzer
      Anyone decent with electrical work that knows a good tutorial on how to make my running lights switch off all together but also turn back on when I need too? I'd assume that my lights are hard wired to the battery or the fuse panel.
      Vehicle is a Kawasaki Krx 1000
      I'm looking to ad IR driving lights for night vision and short of just putting black tape over the lights I feel this would be a more efficient option and it would be cooler. 
    • lmarkie
      Bulldog BD700 Engine Swap
      By lmarkie
      I swapped out the Subaru motor for a Predator 670cc. If I remove the heat shield around the muffler, The stock muffler sits in there just fine with 1" to spare.
      Only problem is the exhaust exit is toward the back seat instead of out the back.
      Do you all think that the stock exhaust would be okay (just as effective) if cut a hole and welded a pipe on the reversed (opposite) end? Of course, plug the old exit end. Other option I thought of was to roll a tube 180° with a 7" center line radius and finish extention of 12" or so.
      Any thoughts?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...