Quantcast
Jump to content


Recommended Posts

Posted

I recently had my starter go out. Itook it to a local starter and alternator shop, and they replaced it with a starter and solenoid out of a mitsubishi, i have not found out which model yet but it only cost me around 80$. Then last week the alt locked up... took it to the same place and although he could not fix mine, on the shelf he had a mitsu alt that was the same down. the the 3 wire plug! Once again he didnt know what model or year it came off of but there is a pattern starting to emergnd once again less then 100$... as soon as i have it in my hands i am gonna try to find numbers and research it but moral of this whole thing is look around there is a lot of these shops around and you can prolly have it fixed locally for a whole lot cheaper! Good luck and i will post new info as it comes!

Posted

Would it help if i gave you guys this shops info and you could just order replacements from him? Its a very small shop and i hace known the owner since my childhood... but super good people!

Posted

Again, I would check your local starter and alternator rebuild guys. I had my alternator bearing start making some noise as dirt just goes right into them and he just put in new bearing and checked everything else. $20 bucks and it looks good as new. He did the starter the previous week for $40 and that was completely rebuilt.

Posted

I've found here in Panama that bringing anything in REALLY helps. They could care less of the part number. A good mechanic will likely remember something that's similar or identical to what we have. However, it would be nice to have part numbers to simply order online...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
    • By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!
    • By Dewayne jones
      Just bought new 2024 AODES 650 work cross 2 seated for my dad and he's very resilient at 79 and still cuts trees, splits and hauls firewood for heating home. He's begun using Polaris ATV with wagon more over his 80's toyo4x4 flatbed after the wood has been split. I figured UTV would be easier, more practical at times and more fun. It does not have a heater and would like suggestions on one that best suits his. He's tough but gets chilled easy now and a heater would make joyriding much better at this time of year. I Have found nothing that specifically Says it's made for this particular UTV I don't know what to make of the More generic Hacher versions Or how adaptable they are. I've read They have come from the factory with Heaters but It says nothing about Adding
×
×
  • Create New...