Quantcast
Jump to content


emergency brake master cylinder

Kinarfi

By Kinarfi
in Joyner UTV SxS Forum

 Share

Recommended Posts

Kinarfi Veteran

Kinarfi

Posted
Posted

I have been browsing the internet looking for a master cylinder for the emergency brake and haven't found a good replacement yet, does any one have a good suggestion of what to replace it with?

It has it's mounting bolts on a 60mm center and a bore of .549" or 14mm, but I think a little larger bore would work very well. I called Beck/Arnley and others and they are all geared for year, make and model information and can't or won't help at all when you say it has a 60mm bolt patter with a 14mm bore. Any one know what the bech/arnley 072-9544 has for a bolt pattern?

Thanks,

Kinarfi

2scoops Proficient

2scoops

Posted
Posted

Jeff, I may have an extra if you are interested. I needed just new e-brake calipers, but it came as a complete assembly. It would be my takeoff, but it actually worked better than the new one.

  • 2 weeks later...
Kinarfi Veteran

Kinarfi

Posted
  • Author
Posted

Met up with 2Scoops while he was travelling to Moab yesterday and got his master cylinder and went home and put it on, Left brake caliper refused to engage, so I took it off and took it all apart and scrubbed the piston and the bore with Scotch Brite pad and pulled the square o-rings out and pulled some shreds off and put it all back together and it's working great now. Seems like when the problem started, the brake was stuck on and got it hot, there was some gum or something holding the piston from operating. To get the piston out, I blew air into the brake line connection and it popped right out. Also disassembled and cleaned the caliper holder and lubricated it.

Now that I have the emergency brake working again, I'm going to Moab also. Any one else coming to Moab? 2Scoops is at the KOA, I may be there or out past in flats some where.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • Eman85
      Fuel injector replacement Massimo 500
      By Eman85
      Pulled fuel injector to see if I could clean it or if it's stuck open. Had a slide on clip that was really tough to get off. Don't see how the clip is supposed to lock into the plastic part that the injector slides into. Any videos or pics of injector replacement? 
    • Rmillerdesigns
      Massimo Msu 500 Has No Power
      By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...