Quantcast
Jump to content


Recommended Posts

Posted

Bought a brand new Polaris 800s in 2012 for my wife ($18500). My first service was $650 (20 hrs) my second service was $2000 and my third service was just quoted at $1100 (now has 60hrs) but my dealer said they could make it $500 and I could do the front ball joints next year.

My wife with our 5 years follow me around our lake and we take it pretty easy, i could drive my wife's Audi S5 convertible just about 95% of the trails we take.

My Suzuki Quad has cost me $200 in Maintenance in the last three years.

Dealer tells me I have a lemon and he knows guys with 3600km and spent $200 in maintenance...

Just looking at what the general consensus is out there...Maybe my dealer is a crook!

But Polaris has lost my business and I buy lots of toys.

  • 1 month later...
  • 3 years later...
Posted

$3000+ for service on a new machine with 60 hrs on it?  You're being taken for a ride for sure over very rough terrain.  Maybe the lemon law applies here - it is a motor vehicle.  I would demand a refund and explain that social media can be an excellent venue to let people know where to spend their money and where not to spend it.

  • Like 1
  • 2 months later...
Posted

You are being taken for a ride my friend, sorry to say.  Polaris makes thousands of machines every year, they are the number one selling machine in the offroad market.   They are also number one in another category, that is consumer complaints per 100 machines manufactured.   Yes the big guy Polaris has the most problems of any manufacturer out there with the exception of the cheap Chinese machines.  Three years back I wanted a new UTV and looked and searched for almost 4 months, drove hundreds of miles and weeks and weeks of reaserch.  I am retired so I had plenty of time to sit on the computer day in and day out and come to find lots of interesting information.  I choose a Kymco 450i UXV,  first reason it is a smaller machine, second the reliability of the engine. Had more features than other brands and the dealer had an actual test track with hill climbs, mud, etc.   I was told to run it thru its paces, and I did.  These machines are built in Taiwan ...not china..they have been in business for 30 years and a major supplier for major brands like Artic cat, Suzuki, Yamaha and even Honda for many years.  Here is the best part..... they have the lowest consumer complaint rating per 100 machines manufactured of any major offroad manufacturer in this country!!  Mine is 3yrs old has more than 900 miles and has O issues, one recall for a seal on the throttle cable which the dealer took care of and gave my machine a thorough inspection of everything while it was there, all at no charge.  Never been back since...no issues.   Polaris has name recognition in the market and they make lots of machines but they do require lots of expensive maintenance.  I would definetly start bombing Polaris with negative advertising and post everywhere you can and the dealer also, let others see how you have been treated.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Skeeter22
      I going from a Yama Rhino and bought a 2026 Ranger 1000XP. I was riding and lost all steering. The steering wheel just spins freely. I have one other video of this happing but has anyone else experienced this.
    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By AlphaSerenity
      Hello,
      Before I invest $10k+ into a brand new UTV for the farm, I want to get my feet wet with a fixer upper and learn the mechanical side of things. I acquired a 2022 Hisun Axis 500 (Lowes-specific model) from an auction for $500. It has only 200 hours and 120 miles on the engine. It looks like the previous owner used it for ranch work and didn't drive it on trails, deep water/mud, or anything too crazy.
      While it runs and moves, it has some problems. It struggles to accelerate up any incline in high and low range and sometimes stalls when I let off of the throttle or change gears. When I apply throttle in neutral, it sounds like it is struggling for fuel/air and pops. When I decelerate, there is a grinding sound coming from the clutch, which I've read to be related to the one way bearing and is semi-common. The last thing I've observed is sometimes the speedometer display sometimes will show a much higher value for a few seconds after barely touching the throttle. Based on the documentation, if a problem is detected from the sensors, the instrument panel display should have an error code rendered on the screen in place of the time, but this isn't happening. Here is a video showing some of these issues (engine is exposed with console removed):
      https://www.youtube.com/watch?v=FFAkO5TaGps
       
      Here is another video of the clutches in action:
       
      I've done some research, but information on this specific unit and sister units is limited. There does seem to be transmission and clutch issues reported. I still need to check into the head gaskets. I don't have the equipment to test compression right now, but I do plan on ordering what is needed soon. I do have an order in place for some cables to read the diagnostics from the computer. There is a shop two hours away from me that works on Hisun products, but I am hoping the problem can be identified and is something within my ability to handle. Below is what I've already investigated.  I am leaning towards the primary clutch needing replacement right now.
      After getting it home and unloaded, I did the following maintenance/checks to it prior to operating it further:
      Changed the engine/clutch oil (and filter) and gear oils using manufacture recommended viscosity Changed the air filter and checked for cracks in the air intake flow. Verified good suction. Cleaned the throttle body Changed the spark plug and verified the gap was within spec (0.6-0.7mm) Changed the coil and coil wire Changed the fuel lines, fuel injector, and verified the fuel pump was outputting the correct initial prime pressure for ignition and continuous pressure after ignition. Also completely emptied the fuel tank and made sure octane 91+ fuel is being used per manufacturer specs. Ran seafoam through system too. Cleaned the spark arrester and verified no cracks or gaps in the exhaust flow Changed out the O2 sensor Checked all wired connections to ensure they were secured and no breaks were visible Checked the belt for tightness and for any signs of wear and tear Verified 4WD and the differential lock function as expected - still hesitates and struggles uphill Verified the fan gears in the shifter are not corroded and working as expected ECU was reset after replacing sensors and fuel-related parts  
       
      Thanks!
    • By mike28honda
      I have an Axis 500 and never had any problems until now,it cuts out 
      at around half throttle. I changed the TPS with no difference, acts like the seatbelts aren't set but can get up to around 15 mph as long as I don't give it too much gas, thanks for any advice 
    • By Nick Varnes
      So I have a Bennche Bighorn 500 that I bought used a couple years ago. Was working fine until this winter when I was plowing and I think it drained the battery. And had a difficult time starting and staying running. Idle seamed really low, and would only stay running if I pushed on the throttle. So I changed the battery, and the acm valve, fuel filter and spark plug it will start up and surgery to 3k rpm but comes back down and dies, unless I give it throttle. I am getting fairly good amount of fuel from fuel pump.  It does spit at stutter right before it dies. What should I try next?
×
×
  • Create New...