Quantcast
Jump to content

Possible misfire


Recommended Posts

So my trooper has been sitting basically since December I always run high test gas and its run here and there at idle from time to time last time it ran seemed ok today while idling it seemed little choppy and giving it gas seemed to be breaking up a little kinda like a misfire I have about 1400 miles on it I plan on dumping the gas and will inspect the plugs I have ngk iridium plugs in it been there since 1200 miles know also have a fuel programmer on stage 1 factory never have changed it thoughts anyone????

Link to comment
Share on other sites

very rare that we need to change plugs in them...not to say never...I would put fresh fuel,then check your fuel pressure ,if that doesnt help,disconnect the ground (or power) to your fuel controller to put back to stock...thats where I would start...Hardy

Link to comment
Share on other sites

So I put 94 octane in it and Lucus injector cleaner and pulled the plugs they were black!!!!! I have never changed my fuel programmer setting always been the factory setting started it up was little ruff for a few seconds but now seems much better

Link to comment
Share on other sites

the fuel controllers dont always work well right out of the box..they are designed to add fuel ..thats why I like to set them up with an o2 sensor...if you disconnect power to the controller then start it will run the joyner factory fuel map untill you power fuel controller back up

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Greg Kilgore
      I would really like to know what you guys think about this. I'll try not to ramble and make it as clear as I can.
       
      I took this new job with companyX as a fiber splicer a year ago. I have a 45' bucket truck and 10or12 x 8 ft enclosed splice trailer I have to take home. Within the last 6 months all the management in the splice dept left. Now the power/construction management and higher ups are filling in. Just recently we were told travel to our 1st job is not payable even though we are in a company vehicle. 
      We are union so I asked the union business manager about this. His reply was be grateful you were paid travel as long as you were and that you don't have to drive your POV to the job.
       
      Last week I had 50hr total. The job area is 4-4.5 hrs away. My time was reduced to 44.5 hrs since we were told this travel thing on Tuesday of that week. I wasn't hired for this area. I was hired for area a lot closer to home. 
       
      Pay is good. Work is not hard. Insurance is through the union and so far pretty good.
      But I hate the thought of having to work extra just to make a 40hr paycheck. Anyone who has to drive as part of their job knows windshield time is not easy.
       
      Anyway what do you guys think. Should I look for a different job or just suck it up because of the decent pay and health insurance.
    • By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • By joeam
      I have a 2018 TW450E that runs in my yard and slow good just will not go down the road seems to be running out of fuel where should i start? I have replaced both fuel and air filter drained gas and tried a small auxiliary tank same issue i have ordered a new vacuum fuel pump to try next anyone in Texas that works on these?
    • By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh
    • By Richard shepard
      I have a 2021 colman 400utv engine will start and idle, as soon as you hit throttle to move engine dies and will only start when you throttle it, let off throttle it dies, I replaced the injector and plug still the same, anyone have any other ideas
×
×
  • Create New...