Quantcast
Jump to content

2009 T2 loosing power

Hopper

By Hopper
in Joyner UTV SxS Forum

 Share

Recommended Posts

Hopper Newbie

Hopper

Posted
Posted

Hello everyone My username is Hopper I am new to this site and I was wondering if any of you could help me with a issue I had last ride.

I had just moved my radiator up to the back box and replaced my starter on a test run it was running really well than

all of a sudden it was like the key was shut off so I checked all the basic functions and could not get it to flash up.

When I got back to my shop I had a look at the fuel system and was producing 50 # and had fue up to the fuel rail

also checked coil for power and there was power at coil plug.

A riding buddy had a T2 there that was in good running condition and I was able to swap out a few parts off to test

On my T2 here is what I swapped out to check ECU unit, cam sensor,crank sensor, coil and had no luck getting it to

start up I also pulled the plugs and they were dry and had no spark.

I am not a mechanic but can figure most things out but this one has me confused if any of you have any input It would

be appreciated. I am impressed with alot of the topics and knowledge that I have seen on the topics great site!

Hopper

Link to comment
Share on other sites
silverbullet Experienced

silverbullet

Posted
Posted

Silverbullet.

You need to check the wiring harness.We have some problems with wiring harness. The plugs the pins push out when you plug them together.Joyners don't like to go in deep water.Start the process 1Start with each wire and trace it ti the computer.And keep going till every wire is tested on the engine harness.At least you had some parts to test with.

Thanks Matt.

If you need any help call 9:00 Am to 5:00 Pm ca..time 928 344 2117

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • hdtran
      Hello from New Mexico!
      By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • Ermd ttk
      UTV Odes Ravager 1000cc - Strange noise from the back
      By Ermd ttk
      Hello friends,
      I got my ODES Ravager UTV yesterday and after a couple of hours of driving when I go downhill I heard a strange loud noise a couple of times, like a gear skipping or maybe something from the differential.
      It doesn't always happen and when it does it is heard for a few seconds and then it goes away and everything works normally, I'm worried if there could be some major malfunction or what could be the problem if someone can help me?
      Thanks a lot.
       
    • Steve B
      "R" light will not go out when the UVT is in any other gear. Is this an issue?
      By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • joeam
      2018 Landmaster Tw450E will not run down the road?
      By joeam
      I have a 2018 TW450E that runs in my yard and slow good just will not go down the road seems to be running out of fuel where should i start? I have replaced both fuel and air filter drained gas and tried a small auxiliary tank same issue i have ordered a new vacuum fuel pump to try next anyone in Texas that works on these?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...