Quantcast
Jump to content

Mule tires!


Travis
 Share

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By Azul
      I have  a 2011, 4010 Gas TransMule with less than 200 hours, and a serious oil leak.  If it is a main seal, what next?  Not oil filter or oil plug.  How do you get to the oil pan?  It has been babied by an old man.
    • By johnpeter
      2021 Can Am Maverick x3 turbo RR  On Ebay
      https://www.ebay.com/itm/314100814877?

    • By techno10
      Had this utv for a couple of months and bought it with this problem. Sometimes it will move thru the gears with no problems, but most of the time there’s a resistance to go from one gear to the next. What helps is to give it a little gas to get it to change gears. I’ve tried adjusting the turn buckle connected to the gear shift, but didn’t help.  Anyone have any advice?
    • By JDSmith
      I have a 2021 Massimo T-Boss 550. It was submerged in water for a period (hurricane). All filters/fluids were drained and replaced/refilled immediately after as well as air box cleaned. Drained fuel tank, popped the supply line off and key cycled to clear the line of contamination. Reconnected line and filled with fresh fuel. The machine fired and sputtered for maybe 30 seconds and died. Upon attempting restart I noted the fuel pump wasn’t priming.  I checked voltage at the pump and it is 12v. I’ve replaced the coil pack, wire, ecu, ignition (which was failing just prior to the water event) and the fuel pump. The new pump still does not engage. Rechecked with new pump and there is 12v at the plug on top of the tank as well as down at the pump. I’ve popped apart all the plugs I can see, sprayed them with terminal cleaner and applied dielectric grease. Still nothing. I’ve talked to a buddy and he has said it has to be a connection or ground issue.  Anyone able to point me to specific plugs wires etc to check? I’m paying for the answer. 😂 
    • eManualOnline
    • By Christina Gildersleeve
      Hey there!

      My name is Chrissy and I work at The Tuning School. I am posting about our new tuning courses for HP Tuners and Dynojet PowerCore for Can-Am tuning. We developed two courses to teach shops and enthusiast how tune their SXS. Check out the information below, and if you have any questions please feel free to reach out!

      Get ready to unleash the potential power of your Can Am SXS using HP Tuners VCM Suite(and their BRP Cable), or Dynojet PowerCore woth your PV3.
      This course is sold as a book and online course in one package. You receive both!
      Learn how to navigate and use your chosen software option to create and load custom tunes to fit your preferences. Take it further with performing your own R&D, using our processes as your guideline. The sky's the limit with proven safe processes developed in house by The Tuning School.

      Supporting late model Commanders, Defenders, and Mavericks; you can learn how to tune for aftermarket injectors and upgraded thermostats. In addition, use the concepts covered for turbo applications to adjust for larger turbo setups, as well as alternative fuels.

      Build as many tunes as you need and gain confidence in troubleshooting issues while you’re out on the trails. Or give your weekend fun haver a little power bump.

      This course was built for the shop and enthusiast in mind. Giving both the freedom to create custom tunes, while also better understanding how tuning works overall.

      Can-Am Tuning using HP Tuners or Can-Am Tuning using Dynojet PowerCore

      If you have questions you ask here or shoot us an email at [email protected]
         
       

  • Gallery Images

×
×
  • Create New...