Quantcast
Jump to content


Recommended Posts

Posted

Somewhere on the face of this earth, there may be someone who sells doors.  Can't find them on the internet.  Netting is a low cost option but doesn't do much for keeping mud out or passengers in.  You might have to make your own if you want more substantial doors.  There are full cab kits with doors but they approach $1,000+.

  • 5 weeks later...
Posted

We have Soft Doors for the T2, plus other panels and Windshields. Our full list is:

Full Cab Enclosure for Hard Windshield  $509.95 (Add a Windshield from below for a Full Cab Enclosure)
Door/Rear Window Combo $449.95 (If you have a Hard Top, you just need to add a Windshield for a Full Cab Enclosure) 
Vinyl Windshield/Top/Rear Combo $339.95 
Vinyl Windshield/Top Combo $309.95 
Soft Top  $119.95 
Soft Doors $309.95 
Soft Back Panel $184.95
 
Extras: 
Zip Open Windows in the Doors $35.00 per pair
Zip Open Windows in the Back Panel $35.00
 
Windshields
Standard 2‐Piece, GP Lexan, Vented, Loop Clamps $299.95 
Premium Economy 2‐Piece, GP Lexan, Vented, Quick Install Straps $279.95
Premium 2‐Piece, GP Lexan, Vented, Quick Connect Clamps $369.95 
Deluxe Economy 2‐Piece, Mar‐Resistant Lexan, Vented, Quick Install Straps $384.95
Deluxe 2‐Piece, Mar‐Resistant Lexan, Vented, Quick Connect Clamps $429.95 
 
Extras:
Dual Vents in the Windshield $10.00
 
Just contact me here or through our Pacific Eagle UTV website. 
Thanks, Mike. 
 
 

JOYTROFCL2.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?
    • By jamesxevan
      I’ve been eyeing a Hisun 500 soft cab enclosure upper doors setup for my UTV, but I’m really not sure if it’s a smart move. The idea of doors and some protection sounds appealing, but I worry they might just be a flimsy afterthought — weak zippers, thin plastic windows, maybe leaking or fogging when wet or cold. What good is “protection” if it doesn’t seal well? Also concerned about ventilation: with soft doors, does the cab get too muggy or stuffy?
      Anyone here use soft-cab doors on a Hisun 500 — did they actually hold up for real riding conditions, or did you end up ditching them for hard doors (or no doors)?
×
×
  • Create New...