Quantcast
Jump to content


What UTV should I buy?

Edelbrock

By Edelbrock
in UTV General Discussion

 Share

Recommended Posts

Edelbrock Apprentice

Edelbrock

Posted
Posted

So I'm interested in a side by side of some sort.

Not sure what make/model to even look at.

 

I would plan on riding on trails with very rough rocky terrain and plenty of mud. Maybe sand once in a long while. I like LOTS of power and drive fast, but also like a trail that is a challenge to get through. I think 4x4 would be a must. I like the idea of a supercharged engine, but I have never owned one, and would be a little concerned about long term reliability or expensive difficult engine repairs. If anyone knows quads, my favorite was the 2008 Polaris Outlaw 525 IRS. For dirt bikes, I raced a 2008 KTM 450 SX-F. So that gives you an idea of what type of off road stuff I liked.

I don't like "utility quads" or "trail bikes". And likewise, I dont want a turd UTV. I want something that looks awesome and performs awesome. 2 seater with some cargo capacity at the minimum.

 

 

Thoughts?

Scott Meszaros Contributor

Scott Meszaros

Posted
Posted

stay away from anything you buy at home depot, lowes, etc............get a name brand.........kawasaki, honda, polaris etc.............all that hisun kind of stuff might work, but i have heard getting service is a nightmare..........i have a 4x4 mule, but it is a workhorse, doesn't have what you are looking for......i will tell you this, i never see anything on here related to the mules..........

  • Thanks 1
Edelbrock Apprentice

Edelbrock

Posted
  • Author
Posted

 

 

 

2023 Maverick X3 X MR Turbo RR

 

Thoughts on this one? 

 
  • Maverick X3 X MR Turbo RR 64 top features
  • Snorkeled engine air intake and CVT
  • 30 in. ITP Cryptid tires
  • Front bumper, half-doors
  • 4,500 lb (2,041kg) winch with synthetic rope

19437091-9827281-120324491.jpg

  • Like 2
Joe Breaux Mentor

Joe Breaux

Posted
Posted

Sorry guys. She loves this car..I think she would give up me before it..It is incredible. Z51 Perf pkg  Magnetic Air ride    4 suspension modes from tour to track...mid engine ..dual tone exhaust modes..front auto lift for obstacles.6 cameras, 14 speaker BOSE sounds. All in Carbon Flash color. With white Napa leather int.

..194mph top spd.. 10 sec 1/4 .

brostar Proficient

brostar

Posted
Posted

I'd go for the STINGRAY over any UTV too, but if you can't afford that, I'd run with a CF Moto Z10. They aren't out yet, but for the price and what you will get, the Z10 will be worth waiting for. 

And the price for the base unit is only $19,999.99. That's amazing!!!
 

 

 

  • Like 1
  • Thanks 1
Joe Breaux Mentor

Joe Breaux

Posted
Posted

I suggested Honda. But CF MOTO  also makes quality stuff..I have a C FORCE ATV .Great machine

..Don't buy anything HISUN OR MASSIMO or anything at Lowes, Home Depot or Tractor  supply.. you will regret it..

 

 

  • Like 1
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • BWF
      Landmaster LM200 Will Not Start
      By BWF
      I have a 2011 or so Landmaster LM200.  I cannot get it to start.  I turn the key and nothing happens.  The brake switch seems to be working, the ignition switch works.  The Coil is new the Voltage Regulator is new and the starter relay is new.
       
      I can connect the terminals on the starter relay and it starts right up and runs fine.  I just can't get it to start by turning the key.
       
      I am having a bit of trouble bleeding the brakes, not much fluid comes out at the calipers when I am pumping the brakes, though that an air bubble near the brake switch might make it not sense that the brake pedal is depressed.
       
      I am at a loss, please help!
       
      Brad
    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Burk
      2021 Axis(Hisun) 700 Will not fire up
      By Burk
      I have a 2021 Axis(Hisun) 700 from Lowes. Will not start. Checked starter, solenoid, spark plug and fuel pump. Everything seems to be fine. The motor turns over and will try to start but just will not. Battery is also good. Frustrated!
    • 180gtr
      Parting out Joyner Sand Viper 1100
      By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...