Quantcast
Jump to content

2014 1140 CPX Newby (both rtv and forums) needs advice re maintenance


D A

Recommended Posts

I'm new with forums and rtvs so let me pre-apologize if i do or say something wrong.  

I bought a used 2014 1140 cpx, 350 hours.  Its been heavily modified.  Back seat removed and a heavy duty bed added etc.  I call it Franken-Kubota.

I would love any and all advice or "heads up" specific to this model.

I need to do a general service, fluids and filters.  I'm confused, are there 3 different hydraulic fluid filters and 1 engine oil filter......etc etc.

I'd like to use Kubota parts, any suggestions other than dealer?

I just bought a new Kubota tractor so I'm all in!

Many thx

Dave in NC

Link to comment
Share on other sites

I buy Kubota parts from either Coleman Equip. CO., Online or Messicks online. You could also contact them For more specifics.

For engine oil, use the correct weight oil (most likely 10W 30 or 15W30) use Shell Rotella diesel engine oil, that's good stuff 👍

I'm not sure about the 3 hydraulic filters, although if it's Power steering,and a hydraulic dump bed I could see where it might have more than 1.

The best advice I can give you, search Ebay,Amazon where ever and find a Shop service manual, not a owners manual, but a Service manual.

They can run upwards of $60, but it is well worth it!

 

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Bill12345
      🙂 2022 hot seat Pioneer 1000-5 trail
    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By NHTracker
      I have 2020 Tracker 800SX LE that I bought new in 2020.  Yesterday i noticed two cracks in the bed in the corners at the tailgate end.  They go all the way through the bed.  I use it around the property moving firewood, dirt and stuff.  Don't know how they could occur.  Has anyone else had this problem?  Is there a fix?  Help!!!


×
×
  • Create New...