Quantcast
Jump to content


2014 1140 CPX Newby (both rtv and forums) needs advice re maintenance


Recommended Posts

Posted

I'm new with forums and rtvs so let me pre-apologize if i do or say something wrong.  

I bought a used 2014 1140 cpx, 350 hours.  Its been heavily modified.  Back seat removed and a heavy duty bed added etc.  I call it Franken-Kubota.

I would love any and all advice or "heads up" specific to this model.

I need to do a general service, fluids and filters.  I'm confused, are there 3 different hydraulic fluid filters and 1 engine oil filter......etc etc.

I'd like to use Kubota parts, any suggestions other than dealer?

I just bought a new Kubota tractor so I'm all in!

Many thx

Dave in NC

Posted

I buy Kubota parts from either Coleman Equip. CO., Online or Messicks online. You could also contact them For more specifics.

For engine oil, use the correct weight oil (most likely 10W 30 or 15W30) use Shell Rotella diesel engine oil, that's good stuff 👍

I'm not sure about the 3 hydraulic filters, although if it's Power steering,and a hydraulic dump bed I could see where it might have more than 1.

The best advice I can give you, search Ebay,Amazon where ever and find a Shop service manual, not a owners manual, but a Service manual.

They can run upwards of $60, but it is well worth it!

 

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
×
×
  • Create New...