By Wandering Bison
I am looking for people who enjoy remote adventures to test a new service I have launched, I thought I'd reach out to the community here.
Almost three years ago, my travels took me to Cape Scott Provincial Park, at the northern end of Vancouver Island, a remote area on the shores of the Pacific Ocean, where I spent a week. While there, I realized I would have had no way of getting notified of a distant earthquake and the resulting tsunami. My Garmin inReach would have allowed me to call for help in an emergency or to get a current forecast, but it couldn't alert me in the case of an immediate risk. Imagine a similar situation in an area at risk from flash flooding, forest fires or a tornado. When I got back to civilization, I tried to find a solution. Surprisingly, no one offered a notification solution using a satellite device like inReach!
So, I founded a company called Adiona Alert to provide the service I needed but couldn't find.
After more than two years of work, including testing the service over the last six months throughout North America and issuing over 2000 safety alerts, including severe weather, to our small fleet of test devices, we are beginning to invite people to join our Early Access program so they can start using the service today for free!
Given where your adventures likely take you, this community would be perfect to test the service.
As we slowly add small groups of users, It would be great if some of you would apply for our Early Access program. You would get these potentially live-saving alerts for free. All I ask in return is to share your thoughts, suggestions, and even complaints with my team to improve the solution.
I would love you to visit our website - AdionaAlert.com, to learn more and apply for our Early Access program.
Thanks for considering this, and let me know if you have any questions or concerns.
Bought it about a month ago and when I test drove it, it ran good. Loaded it up and took it home. Owner said it had been sitting for a long time, but was "just serviced". It only has 500 miles on it total. Drove it around and found out the charging system wasnt working...so had to charge the battery once every week and a half or so. One day my daughter was driving it and it died. I couldnt get it to start again and I noticed there was no fuel in the filter...I first checked pulse/vacuum line to make sure it was sucking and it was. So I replaced the fuel pump with one I found local...which is for a large riding lawn mower...and it worked. Engine started and ran, but struggled at low speed immediately following running it at higher speed. It would bog when decelerating. I have also noticed now that it will backfire some on decell and die.
In the meantime, I went ahead and installed new stator and trigger coil assembly to get the charging system working again (that was an issue because it would not start at all after that...but eventually found that the trigger coil was wired backwards in the plug from the factory). I have also set valves, but I set them to .005 (intake) and .007 (exhaust)...per the manual. But what is weird is the manual states its mainly for the 700 series, but "can" be used on other models. On the front it says 500/600/700. I have noticed that the most common setting seems to be .005.
Anyways it still has the issue to me that seems like its running lean. Not full power now, struggles immediately running it faster, and will die and pop some on deceleration.
My main problem now is that it wont get to higher rpms as fast as it did when I first bought it. It struggles on deceleration after running near top speed.
Things I have done:
changed fuel pump
replaced stator / pickup coil
thoroughly cleaned carb (twice)
set valves to .005 and .007 (is .007 too loose for exhaust?)
anyways it seems to have a lean problem, and wondering if you have any suggestions on what to check.
I have a 2018 Textron Stampede. The engine lost oil and seized up. Tried to find parts but no one had them when I was looking. I found a Textron Havoc
engine and bought it. Fit right in, plugged right in, wants to start but not sure the ECM is working good with this engine. Need some help has anyone been here?