Sign in to follow this
Followers
0
-
Similar Topics
-
By Alex
View File 2013-15 Can-Am Maverick 1000R Service Manual
2013-15 Can-Am Maverick 1000R Service Manual
Submitter Alex Submitted 01/17/2021 Category Can-Am BRP
-
By Regretting my choices
Hello. I purchased this unit as a "non runner" with the intent of using the frame to build a go-cart, but once I got it home it seemed way to good to part out. The motor cranks over, and I have spark, but no fuel. If I put a little fuel in the cylinder it fires up until that fuel is burnt, then of course it dies. The fuel pump is not running and I have removed the plug and there is no power going to it. I have checked the safety switch on the brake pedal and its fine, I have checked the fuses, all good, but am not sure where to go from here. The shifter is missing on the unit, but the indicator light on the dash shows its in neutral, and the e-brake indicator switch is working as well. I am thinking of jumping power to the fuel pump next to see if it runs and if the motor will start.
What am I missing? What can stop the fuel pump from getting power to it?
-
-
By Travis
View File Kawasaki Mule 550,520,500 Engine repair manual
This file contains all specifications,troubleshooting and repair procedures for the FE290D (9.5H.P,286cc) engine used in the Mule 500,520 and 550 models.
Topics covered include, general information, service data, disassembly, reassembly,inspection of parts and maintenance.
Notes:
Make sure you're reading the correct information as this manual covers multiple FE series engine, some of which were not used in Mules, the manual does a very good job of clarifying which specifications and procedures are for which Model engine.
Submitter Travis Submitted 01/13/2021 Category Kawasaki
-
By ANIL SEDALI
Hi friends. I'm Anıl. I live in Turkey. I have a Hisun 700 UTV 2015 Models. My problem is :
inability to change gear after the engine has started. Before the engine starts, it can shift into all gears; but after running, I cannot change gear. At about 3000 km. Fuel injection model. Can anyone help on this topic? Thank you!
-
-
Similar Tagged Content
-
By Regretting my choices
Hello. I purchased this unit as a "non runner" with the intent of using the frame to build a go-cart, but once I got it home it seemed way to good to part out. The motor cranks over, and I have spark, but no fuel. If I put a little fuel in the cylinder it fires up until that fuel is burnt, then of course it dies. The fuel pump is not running and I have removed the plug and there is no power going to it. I have checked the safety switch on the brake pedal and its fine, I have checked the fuses, all good, but am not sure where to go from here. The shifter is missing on the unit, but the indicator light on the dash shows its in neutral, and the e-brake indicator switch is working as well. I am thinking of jumping power to the fuel pump next to see if it runs and if the motor will start.
What am I missing? What can stop the fuel pump from getting power to it?
-
-
