Quantcast
Jump to content


Challenger 750 tons of issues

Doc norby

By Doc norby
in Cub Cadet UTV SxS Forum

 Share

Recommended Posts

Doc norby Rookie

Doc norby

Posted
Posted

Have had my 750 for a whopping 90 hrs. Have put in 2 clutches 2 oil seals and now the key sheared at my rotor generator. Knocking it out of time . These machines are total garbage. I have never mistreated machine mostly drove on flat ground when it’s running. I am conctacting BBB we should get together and start a lawsuit over these hunks of junk

 

  • 2 weeks later...
Thomas osterhout Apprentice

Thomas osterhout

Posted
Posted
On 3/20/2021 at 8:09 PM, Doc norby said:

Have had my 750 for a whopping 90 hrs. Have put in 2 clutches 2 oil seals and now the key sheared at my rotor generator. Knocking it out of time . These machines are total garbage. I have never mistreated machine mostly drove on flat ground when it’s running. I am conctacting BBB we should get together and start a lawsuit over these hunks of junk

 

18 challenger had to get rid of it just junk

  • 1 month later...
dsve Rookie

dsve

Posted
Posted

read my post of cchallenger 750. they are total crap. i have threatened to sue them, they do not care. told them if it breaks down again? i am taking it back to thier factory and set it on fire .biggest piece of junk i have ever bought. but i calmed down and am trading it in on a kubota diesil i should of bought the kubota instead.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Chile
      MSU 700 Oil Burning
      By Chile
      2018 Massimo 700 MSU. The machine started burning oil all of a sudden. One day fine-- next morning burning oil. Looking for advice. Do I pull the engine to inspect the top end or can it be done with the engine in place? Pro? Cons?
      Any and all assistance is greatly appreciated in advance.
      Chile
       
    • Prepper
      Which is the best oil to use ?
      By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       
    • Joe Breaux
      Oil change
      By Joe Breaux
      Decided to do an oil change on the Massimo ...drained oil, screen was very clean even tho oil wasn't.  Then went to remove old filter.. holy crap ..I tried every tool I have, could not budge it..Went to store and got one of the end cap type..fit nice and tight, put a 1/2 in drive ratchet on it..nope..not moving.  Put a 18 on breaker bar o. It. The inside of the removal tool broke off!!  Had to weld it back together. Put a pipe on the bar for more leverage.  Finally broke it loose..
      I have never seen a filter in my 55 yrs of working on engines so tight..And i was the one who put it on 2 yrs ago.  JUST HAND TIGHT!
       
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...