Quantcast
Jump to content


Cub Cadet Challenger MX750 Primary clutch issues

Booker

By Booker
in Cub Cadet UTV SxS Forum

 Share

Recommended Posts

Booker Newbie

Booker

Posted
Posted

I appreciate any advice anyone can give.

I am working on a Challenger 750 that the drive belt broke on.

Removed the side cover and spun the primary drive sheaves. Something was clunking.

Took it off and pulled the outer cover and all of the rollers were out of their spot and clunking when rotating.

I noticed these rollers are not round. They have 2 different flat spots on them. Are they supposed to be round?

If not, How do they go back in? Flat side down, up, I don't know.

 

I apologize for not explaining this properly. I was just hoping someone has seen this before.

  • Alex changed the title to Cub Cadet Challenger MX750 Primary clutch issues
  • 2 years later...
markschulz3115 Newbie

markschulz3115

Posted
Posted

 I just purchased a new sheave and the sliders come from the factory with flat spots.  My question is the same my weights had white dots on the small flat side,   Are those to be facing up as you look at the sheave?

 

20240502_160300.jpg

20240502_162124.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • esmarkey
      2018 cub cadet 750 challenger clutch issues?
      By esmarkey
      Hi, I purchased a used Cub Cadet 750 Challenger that seemed like the belt was slipping so I put a new belt in.  It still acts like the belt is slipping but now I am thinking it is the clutch? 
      What is the best way to remedy this problem? 
      Can the clutch be rebuilt?
      Are there aftermarket clutches available? 
    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • RBonds007
      2019 Cub Cadet Challenger 400 online parts
      By RBonds007
      Looking for an online parts store.  Just need basic maintenance parts tune ups and such.  Any suggestions?
    • CarlB
      750 Sector Rear Diff Swap
      By CarlB
      I have a 2022 Hisun 750 Sector which comes with a locked rear differential. Was wondering if it would be possible to install an unlocking differential.  I see that there are some Hisun made machines that come with the unlocking rear diff, such as Cub Cadet Challenger, some of the Massimos, and probably others. My concern is whether these would be a direct bolt on, using the original axles, drive shaft, and of course matching gear ratio. I've tried to match up part numbers but it seems every brand has their own number system even for parts that I know are identical. If anyone has ever done this swap or has any information about the whether these unlocking rear diffs are comparable to the Sector, I'd appreciate your input.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...