Quantcast
Jump to content


1140 Gun Rack


Go to solution Solved by mcraigchr,

Recommended Posts

Posted
On 8/3/2021 at 12:03 PM, mcraigchr said:

Any suggestions?  

I used the seizmic custom overhead rack. It's at the top of the page, in the link that Travis provided. The style is a perfect fit for my use, as it keeps the rifles extremely secure, and up, out of the way. 

The other manufacturers use an inferior forked design, that can shift around. Instead the seizmic actually clamps to the roll bar. I could literally stand on mine once it was installed. It's rock solid, and can be mounted in several configurations, depending on space available, and preferences. 

But in the interest of full disclosure. There isn't lightning quick access. You'd probably want the constantly in the way floor mounted rack for that.

There's a thread here somewhere that I started about my installation of that rack. There's a few close up pictures. If you're interested in this type of rack, I highly recommend this particular one.

  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By dogfood
      Hello -
      New here - and looking hard at a 2026 Mule Pro-FXT 1000.  My wife insists we'll be going with the Platinum Ranch, because in her words, we already saved $ by not going with a Honda 1000-6.  Ready to pull the trigger on this ... almost.
      We were looking at the factory soft cab, but then realized this won't work with the standard hard top, as the soft cab has dual back windows to accommodate the 3/6 folding seats.  However, we like the hard top.  So recognizing there's a lot available in the aftermarket world, does anyone have suggestions relative to an aftermarket soft cab (sides, rear window, etc.) that will work with factory hard top, windshield and doors - and also allows for a (relatively) simple 3/6 seat conversion?
      Thanks,
      dogfood
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By Recon Marine
      Ran fine parked it in garage and 5 days later would not start or make any noise trying to start. Bought new battery, installed it and still nothing, no noise or anything. 
      Any idea? I can’t figure it out since when I parked it, it was running great. 
      Thanks
    • By old fart
      Trying to find battery size for 2023 750 eps secter, wqantedd to see if any one had in stock as we live outside of town. Seems like it's a highly gaurded secret. 
×
×
  • Create New...