Quantcast
Jump to content


2008 Joyner Trooper T2 Spare Tire/Wheel

Mrusson

By Mrusson
in Joyner UTV SxS Forum

 Share

Recommended Posts

Mrusson Newbie

Mrusson

Posted
Posted

Hey gang,

    I am looking for a 14x6 wheel with a 4/115 bolt pattern with the 4+2 offset for my 2008 Trooper. I have always had a spare tire with my UTV's and I am struggling to find a steel wheel for use as a spare tire with this Trooper. Has anyone had any luck finding a plain steel wheel for use as a spare? My trooper uses the 14" allow wheels from the factory with 14x6 fronts and a 14x8 rears. I assume the 14x6 can be used front or rear as a spare. Thanks for any info you may have come across.

mixfixdave Enthusiast

mixfixdave

Posted
Posted

Honda Civic and others use 4x114.3 and I have a 15” civic set that I use with my BFG AT street tires that fit fine.
Also have some 30x10x15 UTV tires on weld racing drag lites with the dual 4 lug pattern…guy I bought them from had them on a mustang, but the 4x114.3 holes fit my 2008 T4. I had to buy the shouldered lug nuts to fit those wheels, but the stock Honda wheels use the same lug nut seats as the factory trooper.

  • Like 1
Mrusson Newbie

Mrusson

Posted
  • Author
Posted

Dave,

   That is a wealth of information! Thank you so much for the info. I love your BFG streeties setup. Very nice! I will locate me some civic wheels and see what I get put together. I'm sure I will be back with more stuff. Also, thanks for the images of your power steering. That is a great setup and it looks super simple.

  • 3 weeks later...
  • 4 months later...
Dave Ramm Rookie

Dave Ramm

Posted
Posted
On 9/19/2021 at 6:47 PM, fettman1176 said:

I currently own 5 trooper T2's and have extra wheels. Are you anywhere close to Arizona?

Five T2s ? You are a man that must really appreciate the uniqueness of these things. You must also have a wealth of knowledge about the machine as well. Do you happen to know what the back-spacing is on the original wheels like he posted the picture of, both the 14x6 and 14x8? I have searched high and low trying to unearth that information. 

Dave Ramm Rookie

Dave Ramm

Posted
Posted
On 9/2/2021 at 11:55 AM, Mrusson said:

Hey gang,

    I am looking for a 14x6 wheel with a 4/115 bolt pattern with the 4+2 offset for my 2008 Trooper. I have always had a spare tire with my UTV's and I am struggling to find a steel wheel for use as a spare tire with this Trooper. Has anyone had any luck finding a plain steel wheel for use as a spare? My trooper uses the 14" allow wheels from the factory with 14x6 fronts and a 14x8 rears. I assume the 14x6 can be used front or rear as a spare. Thanks for any info you may have come across.

Well now I look like an idiot, totally missed your posting the offset for the 14x6.  I'd like to find out what the offset is on the 14x8 and the maximum  inside offset is you can run on the front before tie rod interference. I want to compile a list of other machines that have wheels that we can use/ interchange. It would be a good reference when you see used wheel tire packages for a different machine at a sweet price. It's always nice to be able to have a couple different sets of tires and wheels on hand for different terrain. 

  • 1 year later...
Nick Schilling Newbie

Nick Schilling

Posted
Posted
On 9/19/2021 at 6:47 PM, fettman1176 said:

I currently own 5 trooper T2's and have extra wheels. Are you anywhere close to Arizona?

Hello, I’m interested in purchasing an original front & rear wheel for my T2. If you’re interested please shoot me a text 619733800five

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • Rmillerdesigns
      Massimo Msu 500 Has No Power
      By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • MilSurpYinzer
      Must have upgrades/spares?
      By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...