-
Popular Now
-
-
Similar Topics
-
By rdc
Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
-
By dragon
I need help I have a 2016 Kubota 1100 RTV my tilt steering wheel locked in the upper position after using the side release. The handle works but does not release the steering wheel to a lower position. If anyone knows and easy fix, please let me know any help is appreciated. Be Safe, Thanks!
-
By dragon
Hi everyone, I am new to the site and I have one question. My tilt steering wheel is locked in the upper position, and I was hoping for someone could help me with the problem. I did spray some WD 40 in the area of the mechanism but still wheel is locked in the upper most position. I am willing to try anything to get the wheel free and move to a lower position. Any ideas will be appreciated. Thanks!! and Be Safe!
-
By KMP
We just bought our 1st side-by-side and wanted to get tips on maintenance items we should address immediately for our 2015 Arctic Cat Wildcat Sport 700 XT. We are truly beginners and welcome any and all suggestions. Thank you, we appreciate your help!
-
By John Taylor
I hatve owned my T-Boss for 16 months. For my use which is very light, I was very happy with it. The only issues I had with it so far was having to tighten all the bolts. Most were loose. I assume the assemblers just didn't recheck once completely assembled. Yesterday, it all changed. I was spraying weeds on my property. One area was slightly wet which I noticed once I was in it. Not to make it worse I put it in 4 wheel drive. I went through the small area with no problem. The issue happened when I went to get out of 4 wheel drive. I couldn't get it out. I checked the fuse and the relays . All checked out good. Still same issue. I even removed the relays hoping it would disengage itself. No results, reinstalled with still no results.
HELP, HELP, HELP, I HOPE SOMEONE HAS AN ANSWER . At this point I cannot use it, as it is just about impossible to steer. If I could get it back to two wheel drive or disengage the front drive to make it steer easier, it would be usable for me. I am not a mud rider, just need it for light work and pleasure.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.