Quantcast
Jump to content


Bristers Trail Wagon Parts

Robert Merritt
 Share

Recommended Posts

Robert Merritt Newbie

Robert Merritt

Posted
Posted

I have an older Bristers Trailwagon model TW11 with a Honda engine. I am trying to find a replacement muffler for it. It is an unusual muffler tapped in the center instead of the end with the heat shield welded on to it. Does anyone know where I can find a new one?

  • Alex changed the title to Bristers Trail Wagon Parts
Buggy Newbie

Buggy

Posted
Posted

My 2016 LM 400 with the Honda 390cc engine uses the original muffler that Honda puts on the engine. In other words you can use the Honda website to look up the parts illustration and match it to yours unless you have an alteration of the original..Its worth a try. 

  • 2 years later...
Jeff D Newbie

Jeff D

Posted
Posted

I have an older brister.  One of the tie rod ends came apart.  I ordered the end listed.  When I tried to change it, the old on is 12mm/1.25 and the new is 1/2-20.  According to the manual I bought the right part.  According to the machine…not so much.  Any idea where is can find the right part?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Homeowner A
      Replacement Battery UTV 400
      By Homeowner A
      What's the best replacement battery option for a Coleman UTV 400?  
    • Ed Michael
      Older Landmaster LM 650 Fuel Problem
      By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
    • HighSon
      Glass Honda Talon windshield adapted to Hisun Sector
      By HighSon
      This mod is not for the fainthearted, as it requires some basic metal fabrication and welding skills.  But the result is worth the effort IMO.  I chose an aftermarket Honda Talon windshield based on economy, size, and construction (aluminum frame, DOT glass, folding, windshield).  It fits OK, a little narrow at the top, and you need to incorporate the lower section of the original acrylic windshield and build some additional plates, but better than being too wide.  If you are wondering why I attacked this mod, it's because mine is driven daily on the street.  Tired of fading, scratchy, hazy plastic.  Sucks in the rain; sucks at night.  Now I can see.


    • Karlibob
      2020 Tracker 800 sx front end noise
      By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...