Quantcast
Jump to content

HiSun Axis 500 Break-In Service

Shannon Watts

By Shannon Watts
in Hisun UTV SxS Forum

 Share

Recommended Posts

Shannon Watts Newbie

Shannon Watts

Posted
Posted

I was reading through the owner's manual that the initial break-in service was 50 miles.  Besides an Engine Oil and Oil Filter change, are any other other fluids (final drive, differential) scheduled for replacement for this initial break-in service?  Anyone got any maintenance schedules on how often to change the oil and fluids?

Link to comment
Share on other sites
aefron88 Community Regular

aefron88

Posted
Posted

It's probably worth replacing both front and rear axles. They don't take much fluid. I would also plan on checking various fasteners and going thru the full grease routine. My Coleman 400 (Hisun) came greased, albeit very lightly. If you haven't greased all the zerks they're definitely due. They also recommend the valve lash be checked at the first service. I've read several reports of tight-to-0 valve lash on new models off the factory floor.

 

Not sure on the 500, but the 550 service manual is available from the downloads section, and has a good table of service hours as well as detailed procedures for each service, including the more technical ones missing from the user manual. I believe all the various hisun models (aside from, the kids 250s) use the same service schedule, and have the same basic parts layouts.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • AlaskaTrail
      2021 Coleman UT400 - Transmission fluid change
      By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
    • moonrover
      Coleman 2022 UT 400 radiator thermo switch replacement question
      By moonrover
      Mine is overheated/burned/melt at connection with its wire connector, parts are ordered to replace both them.  This seems to be a common issue, and some of you already replaced it. I right now just connect the wires, so the fan runs  all the time whenever the initiation is on, but it's better let fan runs as needed with a working temperature sensor/switch. 
      Question: Does some coolant come out by removing the switch/sensor from radiator?  Or, is the threaded hole all the way inside radiator?   If the answer is yes,  I want to drain or extract  some coolant to make its level below the sensor before replacing it, so I don't make a mess with coolant spilled out 
      Thank you.  
    • REDfletching
      Seriously considering buying 2022 Axis 700 from Lowes… any regrets from current owners?
      By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
    • Hugh
      2018 Hisun Sector Crew 1000 engine die after about 15 minutes run
      By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh
    • LindaCall60
      Need manual for teardown and rebuild 2011 hs 500
      By LindaCall60
      Purchased a 2011 bighorn banchee. Needs motor work. Not sure what. Husband is mechanic but not computer savvy. So, is there a manual that will tell him how to tear this down?  We have down loaded a service manual, but he says it doesn't tell him what he is looking for. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...