Quantcast
Jump to content

Massimo 2015 MSU 400 Oil Filter Question

Clight83

By Clight83
in Massimo UTV SxS Forum

 Share

Recommended Posts

Clight83 Newbie

Clight83

Posted
Posted

Hello,

I am attempting to do some maintenance on my late fathers Massimo MSU 400 that he bought back in 2015. It has had numerous issues over the years and needless to say it is by far the most unreliable thing on 4 wheels that I have ever experienced in my life. That being said I would like to change the oil on it, and I cannot find an oil filter that cross references the stock filter number that will work. So far I have tried a Napa/wix 1394 that cross referenced to the Fram 4967 that was shown as the original cross reference. 
Both filters will immediately start to leak oil as soon as the machine is started up. I do have an actual Massimo filter ordered from Amazon which is 15200-F12-0000 and that one has no cross reference to be found.

Does anyone know any filter brand and number that will work on this engine other than the stock filter? I don’t want to continue buying filters only to have them not work and waste more oil in the process.

Link to comment
Share on other sites
Greg Kilgore Collaborator

Greg Kilgore

Posted
Posted

Since Massimo is made by Hisun, just like my Axis. I was able to use a hiflofiltro hf682 oil filter from Amazon. I bought a 4 pack for my cfmoto. Tried it on my 2022 Axis 500 and it worked perfectly. From my understanding all Hisun engines uses the same oil filter. OR if you have to have one ASAP. You could go to Lowes and pick up one for a Axis. At least my Lowes carries the oil filters for the Axis now since they started selling them.

Link to comment
Share on other sites
Greg Kilgore Collaborator

Greg Kilgore

Posted
Posted

From what I've seen from posts on this site about someone wanting to know what filter to use. When I did a search on this site.

The hiflofiltor hf682 filter is concave further with the center hole you use to screw the oil filter on with is a further IN the filter than standard filters are. 

If this filter will work for his massimo I don't know. I know it works great for the axis 500. And since hisum makes I'm assuming it will.

 

The gasket or o-ring is rounded. But I think the key is the concave. Maybe both concave and rounded gasket. 

IMG_20220819_213705.thumb.jpg.8f19b550ed5b120530e0e64f311f77ac.jpgIMG_20220819_213719.thumb.jpg.0acc13726b8e19fa538eaf2efc14749b.jpgIMG_20220819_213759.thumb.jpg.9918d05b6e45b5709a682b871db69d49.jpg

Link to comment
Share on other sites
Joe Breaux Experienced

Joe Breaux

Posted
Posted
On 8/12/2022 at 2:49 PM, Clight83 said:

Hello,

I am attempting to do some maintenance on my late fathers Massimo MSU 400 that he bought back in 2015. It has had numerous issues over the years and needless to say it is by far the most unreliable thing on 4 wheels that I have ever experienced in my life. 

Does anyone know any filter brand and number that will work on this engine other than the stock filter? I don’t want to continue buying filters only to have them not work and waste more oil in the process.

you said it brother..    as for filter, the Amazon filter worked on my MSU 500 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Mark T
      Can I put a larger engine in my 400 colman UTV ?
      By Mark T
      MY 400 is gutless. I would like to know if I can upgrade to a larger engine ?
    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • tim hughes
      2021 axis 500 belt issues
      By tim hughes
      does any one else have a slipping belt on the hisun ...i put new wet clutch one way bearing new belt, cleaned primary and secondary and still get slight slippage
    • KMart
      Massimo Buck 400 overheating
      By KMart
      I have a Massimo 400 Buck that overheats and the antifreeze blows out of the motor everywhere! I don’t have to be doing anything but just driving through the field.  It only has 26 miles on it.  I don’t think the fan is turning to cool the motor.  Any ideas how to fix this?
    • Michael Wood
      2018 Massimo Buck 400 Brake Issues
      By Michael Wood
      I have a 2018 Massimo Buck 400 with 278 miles. 
      Having issues with my brakes. Took the buggy hunting and when I let my foot off the gas pedal it pulls without pressing on the brake. I looked and the pads on all 4 wheels are all toast. The E-Brake hasn’t been on since I have had it. I am guessing it may be a master cylinder issue because all 4 pads are gone. They all seem to have worn evenly that’s why I think the master cylinder. Just got the machine used from a older couple and they said it sat for some time in there pole barn. Possibly the brake lines? Calipers? I took one brake apart and when I depressed the caliper it didn’t stay. Any help is muck appreciated. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...