Quantcast
Jump to content

Hello I have 650 commando rear differential.


Recommended Posts

Silverbullet

No we do not sell renegade rear differential.Which will run the front differential.These are the Joyner 650 rear Differential.As i said we are going to disassemble unit re shim and install heavy duty hardware.These are made from vender who make them for Joyner in China.Check out our website

Thanks Matt

Link to comment
Share on other sites

  • 1 month later...
  • 1 year later...

are those the diffs people were putting in the trooper

No the trooper rear differential.We do the Lenny up grade plus a few other modifications.On all the differential we get from China has gotten better Trooper but we find small mistakes.We up grade the hardware to 12.9 with nuts.We tig the pin and a few other things.

Link to comment
Share on other sites

silverbullet

The 650 are a complete other thing.The back lash is way off and can not be made great.We up grade the hardware and shim the pinion and ring gear to the best we can.We sent out ring and pinion to a test facility to see if they were harden properly and were strong so they did a pull test and they were ok. We have sold about 60 units with a 2 come backs.Vary hard to find them they want a big order of 20 unites doesn't work for us.So we are just constantly looking for them.We have a lead lets hope it pans out.C/v axles are easy to get we have some in stock.

Link to comment
Share on other sites

  • 3 weeks later...

silverbullet

We have ordered some rear deferentials. Trooper,Renegade,Commando.Will all be up graded buy us.Including Back Lash new 12.9 hardware with nuts.We tack weld the pin in place and make sure every thing is up to spec.No other dealer dose this and they charge more money.Some times we have a 10 to 20 day wait.Some times so be aware.

Link to comment
Share on other sites

  • 1 year later...
On 7/8/2015 at 3:04 PM, silverbullet said:

Hello

I have just recived date of first delivery of 650 differentail.We have taken these rear differentails apart and re shim them and installed new upgraded hardware.They will be shipped out starting 7/25/15.

Thanks Silverbullet

I would like to get a quote for one of the Joyner cammando 650cc rear differential. Please

Link to comment
Share on other sites

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • By Steve Toney
      Hello, my name is Steve and just signing up.  Bought my first UTV yesterday.  It is a Massimo T-Boss 550.  
    • By SafeSledBryan
      Hey guys! My name is Bryan and i am the owner and creator of Safe Sled. Not some crazy corporate backed recovery product, but just some guy with an idea. 
       
      4 years ago, I suffered 11 strokes, and am now 50% paralyzed on the left side of my body. I am unable to work a normal job anymore. I was working on the sled 2 years before this all unraveled. My wife told me to keep working on it since i was pissing her off staying home and doing nothing.
      I still plan on improving and implementing different ideas as the product’s revenue continues to grow.
      if the sled is appealing to you, please check out my website, safesledoffroad.com
      Safe Sled Website
×
×
  • Create New...