Quantcast
Jump to content


Coleman u400 2021 won't turn over

Marcus Bentley

By Marcus Bentley
in Coleman UTV SxS Forum

 Share

Recommended Posts

Marcus Bentley Newbie

Marcus Bentley

Posted
Posted

Bought my coleman u400 from TSC last year, was running great. I live on a lake and use it almost daily to climb a pretty steep hill from my house down a path to the water. Last week was driving up the hill and it just quit. First thought was I'd run out of gas but it has almost a full tank of gas in it.  Have tried to get it to restart and the lights come on and it tries to turn over but won't catch. Checked the battery and tried to jump it just in case but it's not that. Checked the starter and it's good. Can't find the spark plug to even check that. I called the local repair guy in town and he told me he doesn't work on Hisun since it's all shit and I'd be better off burning the damn thing so that's been no help. Would appreciate any other ideas. 

Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

Explain the process on checking the battery please.

Not familiar with that machine but the owners manual should tell where spark plug is.

The battery needs to have a charge of about 12.6 volts to be considered good. Less than 12.2 and it probably won't kick in the starter. 

The stator charging system is not the best. 

Can you hear fuel pump?

Any codes on dash?

aefron88 Community Regular

aefron88

Posted
Posted

Marcus,

Glad you got it back running.

 

For future people reading this thread:

Spark plug is on the back of the engine under the bed on all the newer hisuns. The cylinder faces backwards with the plug at the top. Older carb models it's on the fwd side of the engine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Prepper
      Which is the best oil to use ?
      By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       
    • amiracle40995
      2019 Coleman 550 700-7 code at startup
      By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • SkyPilot56
      working on a coleman 550 out fitter
      By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • Homeowner A
      Code Reader for Delphi MT05 Coleman UTV 400 Hisun
      By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • Alien10
      Snow Blade for Coleman Outfitter 550?
      By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...