Quantcast
Jump to content

My air filter is a square box with a flat filter exactly like my chevy trucks


sresener
 Share

Recommended Posts

Never mind after reading the forums here I realized the 09's have a box. Funny the manual shows a filter that looks like a k&n

Be careful, the new box still lets dirt through because of sloppy dimensions. Be sure the filter is sealed around the edges.

Lenny

Link to comment
Share on other sites

  • 4 weeks later...

My 09 had the air box which leaked from the back side. Finally had to put on the old style air intake and snorkeled it up out of the engine compartment, then used a foam Unifilter. Works great, used parts from Home Depot and the auto parts store, less than $50 for the change over. Joyner is aware of the poorly designed air filter on the new machines

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By CoppellDarryl
      Just got a SXS, Looking forward to taking it to Arkansas and the Black Hills of SD.
    • By Charles Hines
      I bought a 2021 Coleman 400 UTV from Tractor supply mainly because of the $2000 off black Friday sale ($6999). I wanted something to do some light hauling around the boat shop and figured this would be a better choice than a golf cart. Initial review is that for the money,it's got to be the best deal going. Fully equipped right out of the box with a lot of nice features. First off,everything worked,that's a good thing. First thing I noticed is that this thing is LOUD,so loud that I use foam ear plugs to run it. The rear axle is locked,like most 4 wheelers,so the tires scrub on tight turns and will tear up the lawn. I found some loose bolts and did a general inspection of everything and tightened up the loose ones as I found them. It's cold here in SE Michigan and I want to do some recreational use during the winter. I bought a 3 Star door and rear window soft enclosure and installed it. Top quality materials and fit great. I added some foam to close off all the gaps and it really does the job. Next I added a Ice Crusher heater kit that uses the coolant to provide heat in the cab. Quality parts and the kit was pretty much complete,I also added a coolant shutoff valve so I can direct all the coolant through the heater instead of the radiator,or blend it as I wish. The heater has a 3 speed fan and 2 directional outlets for this model and with the enclosure will warm it up to shirt sleeve temps at speed with the outside temps in the low 30's. I also added a Kolpin Stealth 2 auxiliary silencer, the exhaust note is definitely quieter and less raspy, but this rig is still noisy enough at speed that you need ear muffs or plugs. I changed out the headlight bulbs to LED's which are a big improvement from the halogens. I figured out a trailer hitch adapter for the oddball thing Colman provides. Now it's just run it in and break it in. For a 400, it is actually quicker and faster than I expected,the specs say 38, but it's closer to 50. Brakes are powerful and smooth. The solid rear axle makes this thing pretty capable,but you also have the push button 4 wheel drive and a push button front diff locker if you need it. All in, it's set up just the way I wanted it for under $8000.
    • By johnpeter
      2009 Polaris Ranger 700 HD XP 4x4 low hours XP On Ebay
      https://www.ebay.com/itm/275568635822?

    • By JOYNERPARTSGUY
      I'm thinking about parting out my 2 Joyner's.  Both have less than 500 miles.   I would also consider selling whole.  I have titles for both and have owned them since new.   Located in northwest Florida.   I'll be in Gatlinburg , TN for Christmas if someone needs a heavy part delivered     Trooper engine has rust on the cylinders and probably won't turn over at this point due to Florida humidity.  The sand spider has a broken input shaft in the rear end, so it needs a new (cheap) input shaft and seal.   It hasn't been cranked in a couple years.  Both are complete.
    • By Roger 99
      My uncle has this machine and his starter is bad we can only find a 9 tooth and the one on it is 11 tooth.  My question is will a 9 tooth work or did they change it to 9 for more torque?
  • Gallery Images

×
×
  • Create New...