Quantcast
Jump to content


Recommended Posts

Posted

Just wanted to know of those of you that have changed out their plugs have you replaced them with the Iridium type as what is original or gone to the standard type plug.If you have switched to another type have you noticed any change in performance?

Thanks,

Posted

Just wanted to know of those of you that have changed out their plugs have you replaced them with the Iridium type as what is original or gone to the standard type plug.If you have switched to another type have you noticed any change in performance?

Thanks,

Are you saying that the Iridium type is standard? if so, I'm impressed. They lasted over 90,000 miles in my GMC Yukon with a 350 in it.

kinarfi

Posted

Are you saying that the Iridium type is standard? if so, I'm impressed. They lasted over 90,000 miles in my GMC Yukon with a 350 in it.

kinarfi

No what I meant as standard was the regular type spark plug,I refered to the Iridium as the original or plug that was in the engine when I purchased the vehicle from dealer.Sorry if I made this more confusing then intended.

Posted

Have not seen a post of anyone changing plugs. On a positive note, even standard plugs last forever now days with lead-free gas unless you wet the plugs because of an engine problem. Will be very interested in what you do and if you are having problems with your factory plugs. Good luck!

rocmoc n AZ/Mexico

Posted

Have not seen a post of anyone changing plugs. On a positive note, even standard plugs last forever now days with lead-free gas unless you wet the plugs because of an engine problem. Will be very interested in what you do and if you are having problems with your factory plugs. Good luck!

rocmoc n AZ/Mexico

No problems,I just decided to pull the plugs to take a look at them and to be honest that was the first time i had seem an Iridium plug(guess i gotta get out more) and was surprised.I then checked with the Part,Pieces folder Kinarfi has and saw that they are listed as replacents from NGK.Not being familier with them is why I was asking.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Joe Breaux
      Decided to do an oil change on the Massimo ...drained oil, screen was very clean even tho oil wasn't.  Then went to remove old filter.. holy crap ..I tried every tool I have, could not budge it..Went to store and got one of the end cap type..fit nice and tight, put a 1/2 in drive ratchet on it..nope..not moving.  Put a 18 on breaker bar o. It. The inside of the removal tool broke off!!  Had to weld it back together. Put a pipe on the bar for more leverage.  Finally broke it loose..
      I have never seen a filter in my 55 yrs of working on engines so tight..And i was the one who put it on 2 yrs ago.  JUST HAND TIGHT!
       
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By Tom Gorski
      Just bought a 2014 Volunteer. Can anyone tell me what parts have to come off to change the oil and filter. I can see them but I can't figure out how to access them. Thank You
    • By Unhappy Kioti K9 Owner
      I own a K9 with 50hrs that has been in for repair more than once the farm.  Multitude of issues, trying to file lemon on it but interested in knowing if owners are organizing for a class action suit.  The dealer informs me there are “a lot of owners very unhappy with these”.
      Thanks
    • By Gorj
      I am going to replace the batteries in my E1. I am not interested in the high cost Lithium or the expensive 6 volt dry batteries.  I am considering four 12 volt deep charge marine batteries. I have a source for 810 amp units for about $100 each.  I have no worries about reprograming the charger because it went out a few years ago and I replaced it with generic golf cart charger. When I decide to do this, I'll keep you posted on the results.
×
×
  • Create New...