Quantcast
Jump to content


Recommended Posts

Guest Lenny
Posted

Hay, Lenny! Know anything about this place? Sand Hollow State Park | Utah.com How far from the house? Mods, please don't move to riding locations until we hear from Lenny!

rocmoc n AZ/Baja

It's not far from the house, 5 or 6 miles. But, forget it. The sand dunes were just OK and the locals used to go there. Some still do. The problem came when they build Sand Hollow Resorvior. and then put in a gulf coarse. It changed the way the sand blew and the amount of sand that blew. So now the sand dunes are not so good. There are rock outcroppings everywhere. A lot of people quit riding there including me. Coral Pink sand dunes are real good and there are quite a lot of trails across the highway from it. It is a much better place to go and if you go there to camp, let me know and I'll tell you where you can camp pretty much by yourself. The main camp0ing place can get packed out, dusty and roughty.

Lenny

Posted

It's not far from the house, 5 or 6 miles. But, forget it. The sand dunes were just OK and the locals used to go there. Some still do. The problem came when they build Sand Hollow Resorvior. and then put in a gulf coarse. It changed the way the sand blew and the amount of sand that blew. So now the sand dunes are not so good. There are rock outcroppings everywhere. A lot of people quit riding there including me. Coral Pink sand dunes are real good and there are quite a lot of trails across the highway from it. It is a much better place to go and if you go there to camp, let me know and I'll tell you where you can camp pretty much by yourself. The main camp0ing place can get packed out, dusty and roughty.

Lenny

There is also the Utah's Little Sahara (found out there's several Little Sahara's) near Delta. It has lots of sand, hills, a mountain to try an climb and just out of the park is lots of trails. Just an FYI. Here's a photo of my knee as I flew over the dunes way back then.2616493920104110397MQGwdZ_th.jpg

Google coordinates N39 43 32.99 W 112 18 25.82 for the fee station and they recently upped the fee but made it a 2 day pass, I think. There's lots of area out side the park also.

kinarfi

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • By Sharon
      The center console is not working, anyone know how to fix it? 
×
×
  • Create New...