Quantcast
Jump to content


08 joyner T2 won't start

SethZ28

By SethZ28
in Joyner UTV SxS Forum

 Share

Recommended Posts

SethZ28 Rookie

SethZ28

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

Kinarfi Veteran

Kinarfi

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

There are some down loads of schematics and wiring diagrams available in the part & pieces thread pinned to the first several posts that may help your figure out you problem. Also if you fill out the information about yourself so we can all get to know you a little better, you may find one of us live just around the corner and can help.

Hope this will help some,

Kinarfi

Thanks, I down loaded the schematics. I work out of town so I haven't got back yet to check it out. I updated my profile

ricksrb Mentor

ricksrb

Posted
Posted

Hello everybody, Im new the forum actually it's my 1st post. I just recently purchased a used 08 trooper at the local bank. It has 535 miles and its camo. That had it as a repo, everything seems to be in really good shape. There's just 1 problem it won't run. They said it needed a ECU I purchased a ECU still nothing. All the lights work, 4 wheeldrive works, horn works, and everything else up front. The engine will crank but wont start no fuel or spark, fuel pump won't even run and the fan will not come on. Crossed over the relays to turn fans on fuel pump and get spark. Still nothing, I would really appreciate any good advise on which direction to go next.

Thanks Seth

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

I assume since you say your getting spark you confirmed that at the plugs,If so have you confirmed your getting fuel to the fuel rail? possible the pump now works but maybe no fuel going through the regulator.Also check fuses and key switch since both fan and fuel pump should come on when key is turned to on position.I know we have at least one other member in Ky,I went to elementry school in Florence Ky and Ryland Heights Ky.Way to many years ago.

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

ricksrb Mentor

ricksrb

Posted
Posted

Yes I checked fire at the plugs, I took a plug out and u could smell a little fuel on it. I checked all fuses in both boxes. There isn't a Inline fuse somewhere I might have overlooked is there? I could only get the pump and fan on when I put jumpers on the rely. I went to elementry at Edison in Catlettsburg.

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

I dont know of any inline fuse,could be.I do know there has been problems with the fuses themselves.If you havnt done so pull each fuse and put it back in,I have heard of some people that have had to do that because of the cheap fuses and bad connections..Was it running when you bought it or did the bank tell you the ecu was to cause of it not starting? There are many more members here that will give you more and Im sure better advise then me so dont give up.

It wasn' t running when I bought it. They had it next door at a little car lot. The mechanic is the one that told me. Which I checked also before I purchased 1. It gets power to the computer, Nothing coming out. I pulled all the fuses and checked them and then put them back. I checked the relays also. It's weird I put the jumpers in and everything works. Then put the relays back in and nothing. They don't have a roll over sensor do they? My bike has one, I wrecked it and it came on. It wouldn't let u start it. Don't know if it has 1 but that's kind of how it acts.

plumber Proficient

plumber

Posted
Posted

sethz28 I don't know whats wrong with your t2 but when you get it running send me a pm and lets go riding I have a blue t2 I live in Louisville Ky.It will be nice to ride with another joyner owner

SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

sethz28 I don't know whats wrong with your t2 but when you get it running send me a pm and lets go riding I have a blue t2 I live in Louisville Ky.It will be nice to ride with another joyner owner

Sounds like a plan plumber, do u have very many places to ride there?

SethZ28 Rookie

SethZ28

Posted
  • Author
Posted

I know a few places we can go there is mountain parkway offroad park it's not to far from you

I live fairly close to the parkway. I never knew of a offroad park there.

  • 8 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • CSM_Retired
      Kioti UTV SxS Forum
      By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • Ed Michael
      Older Landmaster LM 650 Fuel Problem
      By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...