Quantcast
Jump to content


Recommended Posts

Posted

I am a new Joyner owner. I bought a used Joyner Commando 650cc with only 25 hours on it. It lives in the mountains in Arizona. I have had it since June. Ran fine. Now it sputters especially during acceleration. Not as bad after warming it up but still sputters. Any ideas?

Posted

How long an interval between the times you drove it? Remember today's fuel has to be stabilized if the toy is not used regularly. If it was a long time, more than a month or two, I would first try running some injector cleaner in the fuel. Then move on to the tough stuff, Is it electrical or fuel related?

rocmoc n AZ

Posted

How long an interval between the times you drove it? Remember today's fuel has to be stabilized if the toy is not used regularly. If it was a long time, more than a month or two, I would first try running some injector cleaner in the fuel. Then move on to the tough stuff, Is it electrical or fuel related?

rocmoc n AZ

Another possibility is water got into your tank via condensation from the temperature going up and down, during my flying days, they taught me to alway keep the tank full to prevent this. If you have rodents around, and you probably do in the mountains, when it's not being used, put a few moth balls or urinal cookies in or around it, or so I hear.

Posted

How long an interval between the times you drove it? Remember today's fuel has to be stabilized if the toy is not used regularly. If it was a long time, more than a month or two, I would first try running some injector cleaner in the fuel. Then move on to the tough stuff, Is it electrical or fuel related?

rocmoc n AZ

I usually try to drive it every weekend. the sources of gas are sparce up there in the mountains so, yes, the gas does get old. I have tried some fuel stabilizer and the Mystery Oil brand stabilizer. any other products that you would recommend? Does this sound like a carberator problem? What would make you think it is electrical? it has the battery it came with and the other electrical things seem to be working. Does it need a tune up? In my jet ski and snow blower (I used to live in Chicago) I would take out the spark plugs and spray carb cleaner in there. would this help?

thanks for your input

Posted

Another possibility is water got into your tank via condensation from the temperature going up and down, during my flying days, they taught me to alway keep the tank full to prevent this. If you have rodents around, and you probably do in the mountains, when it's not being used, put a few moth balls or urinal cookies in or around it, or so I hear.

There are mice where I am but I don't see any signs or droppings around the vehicle. If there is condensation in the tank then what do you recommend?

Posted

You have injector which are much more reliable than a carb. Get some injector cleaner and put it in the tank per the directions on the bottle. After that start checking connections problems. Start at the fuse box, take it off and check the back also, and carry on thu-out the wiring. Electrical problems are very hard to find!

rocmoc n AZ

  • 2 weeks later...
Posted

You have injector which are much more reliable than a carb. Get some injector cleaner and put it in the tank per the directions on the bottle. After that start checking connections problems. Start at the fuse box, take it off and check the back also, and carry on thu-out the wiring. Electrical problems are very hard to find!

rocmoc n AZ

Thanks! Will try injector cleaner. And checking electrical. Will let you know

Posted

Thanks! Will try injector cleaner. And checking electrical. Will let you know

Check your gas filter too. Actually I would do a flow volumne test on teh pump itself. When you accererate, your fuel/oxygen ratio goes up and if the filter was plugged, it might run fine crusing but when you get on it, it starves for fuel. Keep the spark plug wires seperated by pairs. the 2 out of one coil can be together. Also block them up so they don't touch any metal of the engine. If wires were bad you could get some cross talk between them and a stronger spark is required for acceleration so slight cross talk could only be showing up on acceleration.

Lenny

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By Mike Jenkins
      I have a 2013 Hisun with a 686 Yamaha engine.
      I purchased it from an individual and it ran fine as long as the battery was full.
      I replaced the stator and now it will not start (run).  It cranks fine, has fuel pressure, but will not fire up.  I replaced the coil, no luck there.
      a technician told me that it was the wrong stator and wants a mint to replace it.
      the wires all plugged in when I installed the stator.
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
×
×
  • Create New...