Quantcast
Jump to content

Viper 1100 alternator replacement

Paul

By Paul
in Joyner UTV SxS Forum

 Share

Recommended Posts

Paul Rookie

Paul

Posted
  • Author
Posted

I did not break it...when I first start the motor...it is screaming then quits after a bit. When I turn on the light, it starts to squeal again...weird...I was looking on Ebay, but they are exact replacements...I heard there are alternatives for a lot less money.

Link to comment
Share on other sites
Randy Explorer

Randy

Posted
Posted

I did not break it...when I first start the motor...it is screaming then quits after a bit. When I turn on the light, it starts to squeal again...weird...I was looking on Ebay, but they are exact replacements...I heard there are alternatives for a lot less money.

Are you sure it is not a belt? Mine always made a terrible squeal until I replaced the belt and adjusted it correctly. (I am sure you probably checked this already, but I had to ask!)

Link to comment
Share on other sites
Paul Rookie

Paul

Posted
  • Author
Posted

Is it not the same engine as the Trooper? Is so then i have heard of replacement for it but will have to search.

No idea....I've been to two autoparts stores...lots of ideas as to what will work...but no luck. It would be sweet if there was a list of parts that are cross referenced. I've seen some items..like a fan belt, oil filter, but for starters, alternators, fuel pumps and such...not much luck

Link to comment
Share on other sites
plumber Proficient

plumber

Posted
Posted

take it and have it rebuilt that is what I did when my starter went out

No idea....I've been to two autoparts stores...lots of ideas as to what will work...but no luck. It would be sweet if there was a list of parts that are cross referenced. I've seen some items..like a fan belt, oil filter, but for starters, alternators, fuel pumps and such...not much luck

Link to comment
Share on other sites
  • 1 month later...
bruhaw Collaborator

bruhaw

Posted
Posted

You can get a replacement belt at Autozone for $6.00 and change. I had a squeal and changed it out and it solved that problem. I had squealing and adjusted it a number of times and used belt dressing and it just kept coming back. Just take in the stock belt and they can take the numbers of it and get you a replacement. I believe it is a Gates belt that is stock which is hard to believe but true as it is printed right on it. Even if it doesn't end up being the belt it probably wouldn't be a bad idea to have a spare.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • BOYD
      Need to replace both front cv axels on my 2004 KUBOTA RTV 900 DIESEL
      By BOYD
      I have a 2004 KUBOTA RTV 900 DIESEL and I need to replace both front cv axels.I have been online looking at them and there seems to be a lot of different manufactures to choose from. My question is who makes a good aftermarket set of cv axels for this KUBOTA. I have read horror stories of people buying the  cheap Chinese brand only to find out they don't fit or they don't last very long and fail again. I hate to have to spend over $200 a shaft to get OEM from KUBOTA when I'm sure there is a company out there who probably makes it for them or makes comparable to OEM. Thanks for your help.
    • Kingfish
      Anyone know of a US online retailer for the E1 Discover batteries
      By Kingfish
      I've had a battery failure and need one replacement.  The local distributor told me it might take up to four weeks to get one.  I'd like to order one in sooner than that if possible.  Any help would be appreciated.
    • Michael Flippin
      Massimo T-Boss 410 Starter Spins But Does Not turnover
      By Michael Flippin
      I have a 2023 T-Boss 410. The starter is just spinning but nothing is turning over. It was working fine and just stalled. Tried to restart and starter just spins. Thought maybe the interior of the starter broke. Ordered and installed a new starter and it does the same thing. You just hear the starter spinning but does not seem like anything is catching. I checked the gear the starter engages and that is clean and turning freely. Any idea what the issue could be?
    • mehe
      Is an ATV rally a good fit for our seasonal nudist campground?
      By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

    • Spencer Marks
      2003 Mule 3010 Gas Front Dif and Transfluid replace
      By Spencer Marks
      Hello all, 
      I just finished replacing my front and rear drive shafts. I drained and put new dif fluid in the rear dif. I went to the local dealer and they told me the fill capacity of the front and the transmission as I want to replcae that as well but they could not tell me how to access the fill. One how do I access the fill for front dif and 2 is the transmission fill the same as the rear dif? I don't see a dip stick or fill for the transmission but all in same area.

      Also, anyone can suggest a good shop/service manual for this bike?

      Thanks

      Spencer

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...