Quantcast
Jump to content

joyner parts in Newyork port


Recommended Posts

Buyer Beware I was the one that order these parts it went so bad that paypal gave me my money back then he sent me this email

hi,David, IF you still want to get the goods . please wire transfere the money to our account.

Please consider our request ,we still hope we can establish a long term relationship.

Link to comment
Share on other sites

Bob, Paypal gave me my money back I paid you but you could not deliver the parts I paid you what you ask I didn't charge back. I didn't get the parts paypal gave me my money back.Look everybody what he thinks about America and you want to buy parts from him.There is a storage fee over 1200.00 on these parts plus I was going to have to get them clear from customs.After 60 days paypal gave me my money back. The bill of landing didn't match up with the marking on the boxes and when I email bob all he could say is release the money and he said he's responsibity end it when he ship the parts

Link to comment
Share on other sites

Dear Mr. Plumber,

It seems that oversea re-issued a original bill of lading to the shipper. Please contact the shipper to send the original bill to us or have him surrender it at origin. Otherwise I would need it from you for collection. Please read below. thank you.

"YOUR SATISFACTION IS OUR PROMISE"

Robert Mar

Eurasia Freight Service - NYC

230-79 Int'l Airport Center Blvd Suite 250

Jamaica, NY 11413

Tel: 718-244-8887

Fax: 718-244-1682

E-Mail: [email protected]

Web Site: www.eurasiafreight.com

Link to comment
Share on other sites

hi,David,

our responsibility is over when we deliver the goods to the shipping company.

You have received the bill of loading . you have inspected the goods.

Now why you still hold the money ? If you still feel ok, get the issue resolved and release the money .

otherwise ,we will hold on the goods to wait for resolution.

Best Regards!

Bob Qiao

Link to comment
Share on other sites

Dear Mr. Plumber,

Please help AZ verify the markings on your shipment so it will transport to Louisville. On hold at AZ NY at the moment until confirmed. Tayanne and Sprite in copy. Please acknowledge, thank you.

Hbl#eurfl12512813lui. On hold for marks. Received 4 bags. Marks (70910753 deppon). Please advise, frt on hold. IT to Louisville

Rgds.

Tayanne

"YOUR SATISFACTION IS OUR PROMISE"

Robert Mar

Eurasia Freight Service - NYC

230-79 Int'l Airport Center Blvd Suite 250

Jamaica, NY 11413

Tel: 718-244-8887

Fax: 718-244-1682

E-Mail: [email protected]

Web Site: www.eurasiafreight.com

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Similar Topics

    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • By Smittay
      (posted a similar question to the Hisun folks) Looked at a lot of UTVs lately. Couple Questions about Massimo. Some people say they are just cheap with no customer service. Other people seem to have no problems with them.
      Any opinions on Massimo durability?
      Heard parts might hard to get. Is that true?
      What models are the best?
      If you had one and didn't like it what do you recommend? 
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
×
×
  • Create New...