Quantcast
Jump to content


Recommended Posts

Posted

i just changed mine front and rear and still need to change the transmission i m going to start changing mine 2 times a year and no metal on the front but mine does nt have a magnut plug on the front .... and a lil metal on the rear torn it all apart and it was the locker gear where the locker slides over top of the other two gears the outside lower gear the was worn on the inter most edge where it was nt properly engaging

Posted

Ooh thanks I haven't changed mine in probably a year that's bad and it hasn't been changed since I had them rebuilt so I feel like I might be ok gonna recheck the locker make sure it's sliding and engaging right. Before I pull it apart. And I am as we'll gonna start changing it at least twice a year pending on how much I drive it. It's hard to work on it now cause it's at a friends garage so opening the rear diff would be a lot work in a day

Posted

My fox shocks were I think 200$ each those are in the front the sway away (race runners) in rear were I think 300-325 they work great for me I'm gonna get a nitro kit stiffen the fronts up little

Posted

agreed with 2scoops...some "sparkely oil" is normal... chunks=BADD...once a year/season is better than most get around to but I think is a good schedule,if you do deep water or mud often...then change more often...just my 3 cents...Hardy

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Joe Breaux
      Decided to do an oil change on the Massimo ...drained oil, screen was very clean even tho oil wasn't.  Then went to remove old filter.. holy crap ..I tried every tool I have, could not budge it..Went to store and got one of the end cap type..fit nice and tight, put a 1/2 in drive ratchet on it..nope..not moving.  Put a 18 on breaker bar o. It. The inside of the removal tool broke off!!  Had to weld it back together. Put a pipe on the bar for more leverage.  Finally broke it loose..
      I have never seen a filter in my 55 yrs of working on engines so tight..And i was the one who put it on 2 yrs ago.  JUST HAND TIGHT!
       
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By Tom Gorski
      Just bought a 2014 Volunteer. Can anyone tell me what parts have to come off to change the oil and filter. I can see them but I can't figure out how to access them. Thank You
    • By UTVLover253
      Hey everyone – my name is Adam and I’m doing some market research to better understand the ATV / UTV community. I'm especially interested in hearing about:
      What you use your vehicle for (work, play, etc.)
      What you love about it
      What frustrates you
      What the overall experience of riding has been like
      If you're open to hopping on a casual 30-minute Zoom or phone call sometime this week or next, I’ll send you a $100 gift card as a thank-you.
      No sales, no pitches—just listening and learning. I'd also just ask that you send over a photo of you and your side-by-side in action (nothing formal—trail pics or selfies are totally fine!).
      If you're down to chat, drop a comment or DM me and we’ll find a time that works. Would really appreciate the chance to learn from you 🙏
      Thanks!
      – Adam
    • By Unhappy Kioti K9 Owner
      I own a K9 with 50hrs that has been in for repair more than once the farm.  Multitude of issues, trying to file lemon on it but interested in knowing if owners are organizing for a class action suit.  The dealer informs me there are “a lot of owners very unhappy with these”.
      Thanks
×
×
  • Create New...