Quantcast
Jump to content


Hisun 500cc NO SPARK

jodi.gonzo

By jodi.gonzo
in Hisun UTV SxS Forum

 Share

Recommended Posts

Travis Grand Master

Travis

Posted
Posted

Hello @jodi.gonzo Welcome!

Did you check the magneto, that is where the spark plug wire comes from. Or the plug could be not grounded good.

Did you replace the plug itself? As far as i know the flywheel has nothing to do with sparking :)   

 

 

 

  • 4 weeks later...
  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • AaronD1982
      Massimo Buck 400S UTV Stator......?
      By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • Pajer
      Winch fuse location on a 2021 ut400
      By Pajer
      Does anyone know where the winch fuse is located on a 2021 ut400? I’ve been working on the solenoid because the winch will only go in one direction..
      Either in or out depending if I reverse the leads on the solenoid. Now I have no power to the solenoid and it appears I blew a fuse. Winch is supposed to have a 30 amp fuse.
       
      i checked all the fuses in the fuse box near the battery and the 30amp fuse hanging in the compartment. Everything is good there.
      but I can’t locate any other fuses. Any help would be appreciated.
    • jon pino
      need resistance value on stator
      By jon pino
      having trouble with a 2013 uxv500i. have replaced stator due to bad pulser coil. new unit does not work. manual value for pulser coil is 100ish ohm, measured value is 500 ohm. can anyone with one of these fuel injected later model units check their pulser coil with an ohm meter for me? left side of engine small connector next to 3 yellows. jon 605-545-7040
    • Gorj
      Sector E1 Fuse Panel
      By Gorj
      I can find information on the Internet for the location of the fuse panel for the gas powered Hisun, but I can not find the location of the fuser panel on the E1. I have a wiring diagram and it shows the fuses but I can not find them. There are two inline fuses associated with the drive electrics, I see no fuses for the 12 volt accessories.  Anyone have an idea about this?
    • Homeowner A
      Pick up coil/stator replacement?
      By Homeowner A
      Haven't been able to find a video on it.  How difficult is it to do and any tips, pics, diagrams, videos on it?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...