-
Similar Topics
-
By nods
Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
-
By JoeK
I have a 2009 Hisun 800 Strike (Coleman) with crankcase speed sensor problems. Startup runs great for a while till it heats up. Than the rpm will increase slightly above 2.0 at idle and will not shift into gear because of the high idle. It will start to run rough and have no power like a timing belt jumped a tooth or like the motor is starving for air and just stop running??? Let it cool down and it will start normal but repeat the same symptoms again. Replace the crank sensor several times but it was only a temporary fix. Need help Thanks!!!
-
By Sma
Got a 2018 textron , looks like the head gasket is blown , been doing research and can't seem to find any (out of stock) or back ordered .
is it possible that I have to change the complete engine ??
can someone help me out Cheers
-
By Don W
Changing head and head base gasket, rear cyl. Can anyone help with head bolt torque? Thanks!
-
By Vanny
I purchased a Hisun 750 Sector to use for my oilfield business. It quit running after only 12 days. I was told by the very rude people at Hisun that apparently I wasn’t supposed to be driving it in the mud and that I also put to many miles on it.. so in-turn they will not fix it under warranty. Also, if the salesman tells you they are cheap to fix don’t believe it. They want half as much as what I paid for it to fix it. My advice is be aware that these UTV’s are made for minimal use and not backed by the dealership or the manufacturer. Also it was thrown in my face by the warranty manager that since it was used for business the warranty is shortened to 90 days. I’m not sure what the difference is since it’s not covered under warranty even after only 12 days.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.