Quantcast
Jump to content

Oil Changes Xmission & Diff


Kinarfi

Recommended Posts

Wow, I just changed the oil in my Diffs and I think I should have done more often. When I drained the front diff, the oil was dark and looked like it was full of metal, when I drained the rear, it looked like liquid aluminum with pearl powder. The transmission oil looked normal and like it didn't really need changing. I have 2530 km on the front diff and less on the read because the dealer had to fix my locker. What did your oil look like and how often do you change it?

Link to comment
Share on other sites

I noticed that on my 1st demo a Commando and have been using Morey's heavy duty oil stabilizer in all diffs since. The metal shavings just goes to show how important that 1st oil change is & this occurs in all areas when running in. The diffs tend to get forgotten so use the best product you can. kinarfi, mate I like your idea with the nail and as this is constant issue with me, I'm going to try that one.

Cheers Mike

Link to comment
Share on other sites

I changed my diffs and tranny at 250 miles as it says in the maintenance schedule. And it had some metal in it. I will be changing it again shortly. I changed all the the screws and nuts to hex head bolts. Also put the nut on top as some had to be cut off from scraping across rocks.My air filter and prefilter will be here today.Now I just need to move the intake up over the top of the cage.

Link to comment
Share on other sites

While I was under my trooper changing oil, I noticed how large the fuel line was, It looks to be about 1/2 " ID, I was expect to see something like a 1/4 " line. If I go down a steep hill and this line empties, that's a lot volume to refill, other than moving the pump up next to the tank, has any one done any thing else to the fuel system?

Thanks,

Jeff <_<

Link to comment
Share on other sites

Wow, I just changed the oil in my Diffs and I think I should have done more often. When I drained the front diff, the oil was dark and looked like it was full of metal, when I drained the rear, it looked like liquid aluminum with pearl powder. The transmission oil looked normal and like it didn't really need changing. I have 2530 km on the front diff and less on the read because the dealer had to fix my locker. What did your oil look like and how often do you change it?

Also, when I drop the skid plates, the bolt turns when I try to undo the nut and I can't get a screw driver on to bolt, so after I get the bolt out, I put nail head into the phillips slot and weld the nail to the bolt so it can't turn. Works well. As soon as I get a Photo, I'll add it this post. :blink:

10 hour or 250 miles

40 hour or 250 miles

40 hour or 500 miles

80 hour or 750 miles

120 hour or 1000 miles

This is what is in the joyner paperwork when they want you to service it at first... I can ask if you want to know after these miles and hours when you need to do service work on them...

~Meg

Link to comment
Share on other sites

You want that fuel line big, it is on the suction side of the pump. I really do need to get some pictures for you guys & gals. I mounted the fuel pump next to the tranny on the tank side using the exsiting bracket for the pump. Had to drill a extra hole in the bracket. very easy to do and it also looks very neat.

Link to comment
Share on other sites

I was putting the skid plates back on today and while my "nailed bolt" work Marvelously, they had a tendency to fall out or push up as I tried to put the nut on, so, I took a milk jug and cut it into strips and made holes in it with a leather punch and then cut into pieces, then put the pieces over the bolt to hold it in place while I'm putting the skid plate on. Worked great. :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Mark M
      Hello, Hope someone can help driver side cv axle broke anyone know of aftermarket ones you can get, I have 40 Hours on the machine and don't want to pay 450.00 for a new one from cub cadet but I can't find anything after market 
    • By Randyh79
      Does the transmission share the crank case oil with the engine or does it have its own oil seperate from the engine?
    • By Taz
      I am looking for the front brush guard that was made by Off Road Body Armor.
      They stopped making it to fit my 2023 Kymco 450i..
      So if anyone knows where one is I would like to buy it.
      Thanks Gary
    • By trevor
      my hisun 400 has ben leaking oil out of a small metal tube on the bottom near the oil filter. Got the side by side given to me after been sitting for a couple years  but 2 quarts in nothing happened my buddy went and worked on it and put another quart in it. i thought it just pushed out what it didn't need. but its dry as a bone inside. does have a good clatter coming from the top end as well, with oil in it. looking for some help not much on the internet about these things.
    • By Wesley
      I have a 2022 500 Hisun product, I have had them in the past. I change my oil myself and trying to drain through the hole where I remove the plug is a mess.  How does everyone keep the belly pan clean during the oil and filter service?
       
      Wes Jackson
×
×
  • Create New...