Quantcast
Jump to content


Recommended Posts

Posted

Plumber, do you need some wheels for those tires, or maybe some extra wheels? I got another deal for someone, at present I have my old rear tire mounted on top for my spare. I like my new tires that are mounted on 14 X 6 in. wheels and would like a 5th one. If someone wants two (2) used rear tires on the 14 X 8 wheels with tubes, I'll trade for one General Grabber AT2 27x8.50 R14 95Q 6PR OWL tire mounted on a stock 14 X 6 in wheel.

2107057100104282158eChsEd_th.jpg

The tire in the center, one of the wheels had a rock lodge between the brake and the inside of the wheel. It caused a scratch all the way around and finally caused a shallow dent inwards as the rock shattered. This caused a leak and was repaired using JB Weld epoxy to seal the hole, both inside and out, it worked fine, the tube was put in later when the tire developed a leak in the side wall. Photos later.

Tire shipped to me $98.92

Wheel shipped to me $105.74

Mount tire locally $12.50

Total for (2) used rear tires on the 14 X 8 wheels with tubes $217.16 + shipping.

https://teamjoynerusa.3dcartstores.com/14-x...nt_p_9-117.html

https://teamjoynerusa.3dcartstores.com/14-x...ar_p_9-118.html

Posted
Plumber, do you need some wheels for those tires, or maybe some extra wheels? I got another deal for someone, at present I have my old rear tire mounted on top for my spare. I like my new tires that are mounted on 14 X 6 in. wheels and would like a 5th one. If someone wants two (2) used rear tires on the 14 X 8 wheels with tubes, I'll trade for one General Grabber AT2 27x8.50 R14 95Q 6PR OWL tire mounted on a stock 14 X 6 in wheel.

2107057100104282158eChsEd_th.jpg

The tire in the center, one of the wheels had a rock lodge between the brake and the inside of the wheel. It caused a scratch all the way around and finally caused a shallow dent inwards as the rock shattered. This caused a leak and was repaired using JB Weld epoxy to seal the hole, both inside and out, it worked fine, the tube was put in later when the tire developed a leak in the side wall. Photos later.

Tire shipped to me $98.92

Wheel shipped to me $105.74

Mount tire locally $12.50

Total for (2) used rear tires on the 14 X 8 wheels with tubes $217.16 + shipping.

https://teamjoynerusa.3dcartstores.com/14-x...nt_p_9-117.html

https://teamjoynerusa.3dcartstores.com/14-x...ar_p_9-118.html

Kinarfi,

Let me try to get this straight what you are offering? 2used back tires, and 2 back rims 14*8. I understand about the wear and tear on the one rim.

  • 4 weeks later...
Posted

Just a note to you guys that like the mud and water, the diff vent hoses are not very high, they could use a little more length, also the fuse box under the dash on the passanger side is not sealed on the firewall on my car. I sanded the back side of the box to get it to fit to keep the mud out of the back of it. There was also some one that sucked water in through the breather (crome canistar on drivers side) into the engine that cost them a rebuilt engine

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

×
×
  • Create New...