Quantcast
Jump to content

2018 Massimo 500

Robert Sawyer

By Robert Sawyer
in Massimo UTV SxS Forum

 Share

Recommended Posts

Robert Sawyer Rookie

Robert Sawyer

Posted
Posted

Hello!

I purchased a 500 with 100 miles owner didn't use like wanted.  I have been using (live in Michigan) just started getting cold and now i am having a stalling issue all the time.  The unit start runs great but when come to a stop it normally stalls, and when give it power it can bog at times.  I know there are the obvious plugs, fuel filter etc but all seem ok, figured there might be a trick tip to this before i dive in.

2. When i take the center cover off there is a pipe that is not covered?  what is that for ?  should it have been covered?

Not sure it weather is connected i let it warm up but usually have to hold pedal down.  Ran perfect since i bought it and now acting up

 

Thank you in advance

Link to comment
Share on other sites
Travis Grand Master

Travis

Posted
Posted

https://www.ebay.com/itm/IAC-Idle-Air-Control-Valve-For-HiSUN-400-500-700-ATV-UTV-Bennche-Menards-Massimo-/274012488967?redirect=mobile

Here is the part itself.

It should be located around the intake into The engine. I'll do some more looking.

10 hours ago, Robert Sawyer said:

So I changed plug, cleaned air filter , went to recreational gas I am directed to the air idle control as coming up as error code however I can not locate the part on engine. 

 

Need location ion of air idle control 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • MOTORHEAD1959
      Coleman Powersports Youth 125cc ATV won't start
      By MOTORHEAD1959
      ATV just clicks when trying to start. Battery is good, has a new solenoid, and all the wiring looks good. any suggestions on where to go from here? thanks 
    • hdtran
      Hello from New Mexico!
      By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • Steve B
      "R" light will not go out when the UVT is in any other gear. Is this an issue?
      By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • Travis
      Kawasaki Mule 550,520,500 Complete service manual
      By Travis
      View File Kawasaki Mule 550,520,500 Complete service manual
      This is a complete service manual for the Kawasaki Mule 500,520 and 550 models.
      Topics  covered include Brakes, Steering, Electrical system, suspension and fuel system. As well as engine repair procedures and Transmission/Final Drive procedures.
       
      ********************************************************************************************************************************************************************************************
      If you need more information about the engine this manual linked below is chock full of information.
      Thanks goes to @cliffyk for getting these files all  into one PDF format for uploading.
      Submitter Travis Submitted 04/18/2021 Category Kawasaki  
    • ETHIEL
      2012 Coleman 500 UT plug keeps fouling.
      By ETHIEL
      Spark plug keeps fouling. after 10-15 minutes of running any ideas what to look fore 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...