Quantcast
Jump to content


Recommended Posts

Posted

At the request from the Joyner dealer hear and I am sure from many others, Thunderinc, Team Joyner

has posted on there web site a warning about there buggies and the damage it will cause.

Quote from the Team Joyner web site:

Joyner does not recommend jumping your vehicle or running your vehicle through more than 20 inches of water.

This is located on the first page of there web site.

Posted
At the request from the Joyner dealer hear and I am sure from many others, Thunderinc, Team Joyner

has posted on there web site a warning about there buggies and the damage it will cause.

Quote from the Team Joyner web site:

Joyner does not recommend jumping your vehicle or running your vehicle through more than 20 inches of water.

This is located on the first page of there web site.

Thanks for that, it's called a disclaimer and all companies do it these days and T.J USA is no different. Good on them for putting this on there web site. Don't give all the credit to Team Joyner, Polaris have Disclaimer warning stickers on their machines and printed in their manuals just like Joyner do. So good on you too Polaris for that, but I wonder after the recent deaths and injuries with their tipsy RZR they are going to add " Serious injury or death can result from turning or climbing a hill with a RZR" .

Cheers Mike

Posted

brostar, when i was a kid, about 20 years old i had a 56 ford pickup that i had done alot of work on. It had a 327 with a 4 speed muncie tranny. all the body work had just got done and i was going to get it painted in the next couple months. Any way i was down at salton sea where they can have flash flloods. this was back in i think 1974. Anyway i was down at the dessert and driving through this dip that had about 6" of water in it and it is about a 100 yards long. I get about half way through it and look to my left and see a wall of water about 3' high. it hits the door and caves it in, shoves the pickup of the road and into a hole full of water. The pickup flips and i am standing inside of the cab with my feet on the roof waiting for the truck to fill up with water so i can get out. I end up going out the passanger side window as the truck starts tumbling. After i got out i was in the water a good 1/3 of a mile befor i got to the side of the river. The only thing i had on was my under wear, everything else had been riped off me. I was cut up pretty bad. It was raining so hard you could hardley see and my skin was burning so i wraped myself under a bush till it stoped raining. After about 3 hrs somebody found me and took me to my parents camp. The next day we went back and found the pickup. it was upside down, totaly buried in the river bed. The tires were the onlything showing and you could only see about 4"of them. the truck was completely pulverized from rolling rocks hiting the cab and it was full of sand. I was very lucky. So what i am trying to say is be careful when you are around water and it is raining. I never expected a wall of water to come down that river bed and it was not very deep when i started into it. It was like a damn broke. That same rain storm washed out interstate 8 and the rail road tracks and alot of other bridges

Posted
Thanks for that, it's called a disclaimer and all companies do it these days and T.J USA is no different. Good on them for putting this on there web site. Don't give all the credit to Team Joyner, Polaris have Disclaimer warning stickers on their machines and printed in their manuals just like Joyner do. So good on you too Polaris for that, but I wonder after the recent deaths and injuries with their tipsy RZR they are going to add " Serious injury or death can result from turning or climbing a hill with a RZR" .

Cheers Mike

Your right Mike, I believe it is a disclaimer here. Not to protect the rider like you are saying.

I think they are saying there machines were not intended for this use.

This is definitely true with the water level.

Don't you agree?

Posted

No ATV or SidexSide is sold for water use. Only after some major aftermarket work should water be attempted above a reasonable level. Water, especially salt is poison to any mechanical toy or piece of equipment, even a boat.

rocmoc n AZ/Mexico

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?
    • By Timbo
      I never see videos of hear of people taking these things to the big trails. Do you ? I just got one and want to.
       
×
×
  • Create New...