Quantcast
Jump to content

Hisun E1 Radio Install


Gorj

Recommended Posts

Installed a radio/media player in my new Hisun Sector E1. Got a universal under dash kit from Amazon for $13, a radio/media player from Walmart for $17, and two speaker kits with grills from a friend for $10. Had some wire, connectors, and screws lying around. Mounted the radio in the plastic under dash kit. The radio is amazing for the price. It is only about two inches deep, but has Bluetooth, USB, and AM/FM radio. Mounted the speakers in the panel under the seat. Ran the wiring through the drive shaft tunnel. Installed a in-line fuse for the + wire and tapped in to the head lamp switch for the ign on wire. Tapped in to a ground wire in the wire loom behind the switches. I use this to play my tunes from a flash drive. I did not even bother to connect an antenna to it. Because the E1 is electric there is no engine noise to drown out the music!

 

E1 Radio.jpg

  • Like 1
Link to comment
Share on other sites

Nice! If I add anything else to my electrical system. I'll have to use a power distribution box. Mine came with a positive battery terminal, that had an add on lug on it. 

Unfortunately, I've taken the lazy advantage of using it to power several things. Electrically speaking, it's not a concern. But it's very ugly.

Link to comment
Share on other sites

I have a 15 amp plug-in inline fuse at the battery plus terminal and a 14 gauge wire running to the front behind the dash. I use that to power the radio and an LED light strip that is in shipment presently. I will mount the switch for the LED lights in the knock on the dash behind the steering wheel. I am mounting the 12" light bar on the front bumper, just in front of the grill. Are you aware there is an empty 12v. connection in the rear under the tailgate? It is powered when the lights are on. In the wiring diagram it shows to be  for a license plate lamp. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By todd93
      Hi, all! I. I'm new to the board, hoping someone could help me out! I have a 2020 Hisun Sector 550C that I bought new in 2021. Today, I took some stuff next door to my parents. When I went to leave, I turned on the key, heard the solenoid click, but no lights, no guage activity, no fuel pump, and no starter. 
       
      The battery is good, I checked all the fuses, they are good. Not sure if the relays are good, or even what to look for there. Is it possible that it's maybe a wire? 
      I'm really stumped on this one! Any help would be deeply appreciated! Attached is a pic of the fuse box layout. 
       
      Thanks! 
      Todd 
    • By Randyh79
      Does the transmission share the crank case oil with the engine or does it have its own oil seperate from the engine?
    • By Randyh79
      Does anyone know how to adjust the headlights on a 2024 Hisun sector /Bad Boy Bandit 750? The high beams are where the low beams ought to be.
      Thanks Randy
    • By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
×
×
  • Create New...