Quantcast
Jump to content


2013 hisun 500 efi utv. No fuel, no spark

Robby

By Robby
in Hisun UTV SxS Forum

 Share

Recommended Posts

Robby Rookie

Robby

Posted
Posted

Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.

Robby Rookie

Robby

Posted
  • Author
Posted

There is no kill switch. The battery is fully charged. waiting on new magneto, hope this will solve the trouble. If not magneto it has to be in the harness somewhere. Could maybe be bad ground?

  • 2 weeks later...
Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

My 2013 Uforce has a red push button kill switch on dash left of steering wheel.

 

Look and see. May be something you missed. May not be there.

Could use multi meter and check for voltage at fuel pump plug.  Possibly trace back wires.

 

But fuel pump not working and no spark sounds like a roll over protection switch or relay that needs to be reset.

Savage3 Contributor

Savage3

Posted
Posted
On 9/17/2021 at 11:46 PM, Robby said:

There is no kill switch. The battery is fully charged. waiting on new magneto, hope this will solve the trouble. If not magneto it has to be in the harness somewhere. Could maybe be bad ground?

If magneto didn't work, check trigger coil at stator, check coil, then look for grounding issue. Review service manual that Travis posted above for specific testing/troubleshooting procedures for your model. The manual provides step by step guidance. 

  • 6 months later...
  • 2 weeks later...
Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

I reread the posts and got me wondering.

I had a TroyBilt generator with B&S engine. I changed oil one summer. Started gen and all was good.

Well winter rolled around. Power went out. Went to start gen and it wouldn't hit a lick. Done everything I could and was still sitting in dark. Next day still no power. Gen still wouldn't start UNTIL I pulled the LOW OIL SHUTOFF WIRE.

Wonder if his machine or any in general has a low/no oil shutoff? That would explain the running and shutoff if parked unlevel and it tripped the no oil switch. If it has one.

  • 6 months later...
Adam Payne Newbie

Adam Payne

Posted
Posted

So I had a customer with a 2015 hisun vector 500 that had no spark the fuel pump would not prime it ended up being there is a purple wire that is in the wire loom that goes from the dash instrument panel back to the fuse box (cdi) to fuel pump that wire needs constant 12v and mine didn't so that how I found the break

  • Thanks 1
  • 1 year later...
Greg S Newbie

Greg S

Posted
Posted

I have a vector 500 I have no fuel ,no spark ,,,I put a wire straight from battery ground to the left wire of the fuel pump and it primed with key,,, could this be the purple wire your talking about cuz I still have no spark

  • 2 weeks later...
  • 1 month later...
vachi Newbie

vachi

Posted
Posted
On 9/6/2021 at 3:46 PM, Robby said:

Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.

did you ever figure out the no start issue?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Frank Mac67
      AXIS 500 WILL NOT START. HELP!
      By Frank Mac67
      My Axis 500 has been operating properly for almost a year with Zero problems. While I was away my granddaughter & friends were riding & playing in the snow. They went to the gas station to fill the tank & the vehicle would not start afterwards. I BEEN GIVING MULTIPLE STORIES: The ATV will not start. When I turn the key I can hear the fuel pump come on but nothing happens other than that. 
      - NO CLICK - NO OTHER NOISE
      *I CHECKED THE BATTERY 12.43volts
      *I replaced the solenoid inside the battery compartment. 
      Seems the next electrical component in line has battery connections IN & motor connections OUT with 2 other small wires connectedaswell(I do not know the name of this component).
      Can anyone help?
      I can not find an ordered list of electronic components starting at the battery.
      Can anyone help with this?
      Thanks in advance for any help.
       
    • hetovi
      Best UTV Windshield for Extreme Conditions
      By hetovi
      Hey everyone,
      I’m in the market for a UTV windshield that can withstand extreme conditions, including high winds, dust, and off-road impacts.
      I’ve seen a lot of options out there, but I’m unsure which one will provide the best protection and durability.
      Does anyone have experience with windshields that excel in these environments? Are there specific brands or materials you recommend?
      I’m particularly interested in options that offer both durability and clarity.
      Any tips or personal experiences would be greatly appreciated!
    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...