Quantcast
Jump to content


BMS Stallion 600 freewheel going downhill

Phil

By Phil
in Other UTV SxS Forum

 Share

Recommended Posts

  • Alex changed the title to BMS Stallion 600 freewheel going downhill
kenfain Experienced

kenfain

Posted
Posted

Mine does a little freewheeling at times. Revving the engine will get the rpms up enough to activate the engine brake. 

I don't know any other way to activate it when it doesn't kick in automatically. So if you've tried that already, then I'd say that you have an issue. 

  • Like 1
Phil Newbie

Phil

Posted
  • Author
Posted

Thanks Kenfain for your input. When I first got the UTV it didn’t freewheel, but has since started to. I know Polaris and other UTV’s freewheel and that is normal for them. Yes, hitting the gas does re-engage the clutch. Perhaps the freewheeling is normal, I just don’t want to damage it more if I have an issue 

kenfain Experienced

kenfain

Posted
Posted

Could be that as yours has aged, it has loosened up a bit. As long as you can still activate it, in a consistent way. I wouldn't worry about it unless that changes. 

If it starts to act up, like failing to kick in, even when prompted. Or if it feels like an unsafe condition results. Then you might have an issue. 

Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

My cfmoto Uforce 600 had the wet clutch go out. Before the clutch went out the engine brake worked just fine. I got a replacement wet clutch, clutch drum, engine brake, etc from Amazon and not official cfmoto parts.

 

After putting everything back together with the new engine brake. Mine acted just as you have described. Most of the time it would engage. There were times it would not. But hitting the gas would raise RPMs and then the engine brake would engage. 

 

In the 6 months mine has been doing this. It hasn't hurt anything. Maybe caused a little more brake pad wear when engine brake wasn't engaged but that is about it.

But I don't ride in extreme situations very often with the wife.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • Butch
      2023 Hisun Axis 700 fuel problem
      By Butch
      I have a AXIS 700 EFI Fuel pump pressure stays at 40 psi and when return line is blocked the pressure goes to 60 psi. and wll only run with return line closed. 
    • Rmillerdesigns
      Massimo Msu 500 Has No Power
      By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • MilSurpYinzer
      Must have upgrades/spares?
      By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!
    • Dewayne jones
      New to UTV's. Have ? MidSouthTNarea
      By Dewayne jones
      Just bought new 2024 AODES 650 work cross 2 seated for my dad and he's very resilient at 79 and still cuts trees, splits and hauls firewood for heating home. He's begun using Polaris ATV with wagon more over his 80's toyo4x4 flatbed after the wood has been split. I figured UTV would be easier, more practical at times and more fun. It does not have a heater and would like suggestions on one that best suits his. He's tough but gets chilled easy now and a heater would make joyriding much better at this time of year. I Have found nothing that specifically Says it's made for this particular UTV I don't know what to make of the More generic Hacher versions Or how adaptable they are. I've read They have come from the factory with Heaters but It says nothing about Adding
    • Speedy
      2008 HiSun 700 Atv parting out because the motor is bad. Anybody need parts because I still have the whole rig!
      By Speedy

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...