Quantcast
Jump to content


Recommended Posts

  • 2 months later...
Posted

TapBoss makes a good point, it really does seem to be related to the oil change. Check the things he's suggested, if that doesn't help, then you'll need to find out what trouble code is causing the check engine light

Posted

Check the connection from the oil sending unit to see if it has a good connection and also check the ground.  If it happened just after an oil change make sure that you have the correct amount of oil in the crankcase, also sometimes the low oil sending unit has to have some time to refill after a oil change.

  • Alex changed the title to Massimo Buck Check Engine Light
  • 5 weeks later...
Posted
2 hours ago, U.P.Dan said:

My buck 450 is running good, however I now have the check engine light....code is 0850. Where can I find out what it is? Thanks, Dan

Welcome to the forum U.P. Dan, sorry, but I can't easily answer your question. 

I suggest that you start a new thread, you'll get more exposure, and that should make it easier to get a faster response from someone who can answer your question. 

Good luck!

  • 3 weeks later...
  • 2 weeks later...
Posted

Bleed oil from the oil filter sometimes an air pocket or the filter does not have oil in it and will cause the light to come on.  To bleed the oil filter loosen the filter crank over the engine until oil comes out then re tight the oil filter, start engine.

  • 10 months later...
Posted
On 7/12/2022 at 10:34 PM, Michelle Holmes said:

Massimo sent me a new throttle assembly, injector and still has no power.  I’m getting very frustrated, wish I never bought.  Nobody in San Antonio Texas will touch it

Welcome to the very large  world of dis-satisfied Massimo owners.. I bought mine in 2017 . it broke on the first day.. To date, Massimo has never paid one dime for the many many repairs it needed.. only one shop will touch them in my state.. CASH ONLY up front!   Good luck........... BTW.. is that a Lhasa Apso in your pic?  looks just like mine that passed at 14 yrs old .. Loved that dog

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By dilger
      Transmission vent leaks oil out of it after using 
    • By mfitzner
      Cranks after installing a jumper wire to ignition switch to get power but will not start
      Have spark and fuel pump runs
       
    • By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • By JohnnyB
      My Massimo 500 will not start. I’ve checked all the obvious things. It turns over just fine. fuel, spark, fuse box are all good. I can’t figure it out. Any ideas would be greatly appreciated. Thank you.
×
×
  • Create New...