Quantcast
Jump to content

Aftermarket Fuel Pump?


Recommended Posts

In the interest of always being prepared for trailside fixes (I go out as the solo vehicle quite a bit), I want to carry a spare fuel pump. Electric fuel pumps always seem to fail unexpectedly in cars, so it seems like a good idea. The joyner dealer quoted me $215 and had one in stock (which tells me they commonly break). They said it was a bosch pump. I have to believe that this bosch pump is available through a local autoparts store much cheaper. Does anyone have this number? Does anyone know of another alternative to this pump?

Thanks for the input. Also, as a newcomer to this board....looks like a lot of the people I want to know are on here. You know the type...the ones that can't leave anything alone!

Link to comment
Share on other sites

G'day oceanjake, glad to see you finally made it over to UTV Boards. I think your find the fact that your dealer has certain spare parts is partly because of what you said but also logistics, or the cost of. I have not heard of a fuel pump failing yet but you never know. Just to give you an idea of the cost of individually importing a spare part from China to NZ which is closer and cheaper than the States. A small item less than 5 KGs = US$90 air freight, bank fees in NZ for a T/T US$12.50 and bank fees in China US$25. Even if the item cost $1 wholesale before you even cost out the retail price you have a $127.50 charge, and then another charge from Team Joyner to the Dealer. The way around this is to bulk order spare parts and ship them out to the dealers with their vehicle orders.

Your plan of carrying a spare fuel pump is all good & it just might save your bacon one day.

Cheers Mike

Link to comment
Share on other sites

  • 2 weeks later...

I had my Trooer loaded on my trailer ready to wash the other day when I noticed a fuel leak. Upon closer inspection I witnessed fuel dripping from the positive terminal. Of course I had to take the terminal off and clean the area to double check because I couldn't believe my eyes (which made the leak worse). Lucky for me I bought the extended warranty and a new pump is on its way. The funny thing is that the leak stopped after I washed my unit and is still holding after 4 days. All of a sudden it doesn't seem like a bad idea to carry a spare with a couple small vice grips because I too ride alone a lot of the time.

Link to comment
Share on other sites

  • 3 months later...

The external stock pump for the 800cc & 1100s is only rated at 3 Bar and 115L/H. 3 Bar equals 43.51psi, however the fuel regulator is rated at 55psi so adjusts the pressure up & then on to the fuel rails at this factory setting. The upgrade external fuel pump (thanks to Art) is the Bosch 0 580 254 910 . It looks just like the stock pump with the same colour blue plastic wrap and it's the same size so will fit the stock bracket. It is however, an upgrade because the specs are 5 Bar (73.5psi) and 130L/H . Don't worry about the extra flow, that's feed back into the petrol tank.

I do see one major benefit for upgrading your fuel pump and just to quote from the Troopers owners manual "The temperature of fuel has a great influence on pump function. When working under high temperature for a long time, the pump pressure will drop rapidly if fuel temp. is over a certain value....." The Bosch 910 fuel pump will be able to cope better than the stock fuel pump in this saturation by having more fuel pressure.

So for you guys & gals riding around in the desert all day long and have experienced the engine missing, stopping or hard to start a hot engine, that could be why.

Kinarfi, could you put the Bosch 910 fuel pump in the Parts, Pieces, and Information for our Troopers please.

Cheers Mike.

Link to comment
Share on other sites

Thanks Brostar, and thanks for reminding me the list it, Got it done.

Another thing to consider with these high pressure fuel pumps is hosing, I replace my rubber hoses with Tygon Clear tubing and shortly there after, I experienced some leaks at the connections. It was weird, where the hose clamp band overlapped is where it leaked, to cure the problem, I used stainless aircraft tie wire to clamp the hose on. Take two wraps and put a dab of grease on pull it good and tight and the start twisting. I guess Tygon doesn't push around and mold like rubber hose.

Kinarfi

Link to comment
Share on other sites

Guest Lenny

Gee, mines been missing a little. I contributed it to the rich mixture I'm getting with my blower setup. Checked the plugs today and they had a little black soot around the outer edge but the center porcillen is a light orange-ish tan. So it apears a little rich and the engine has been running cooler then before. When I took the blower off my dealers machine, I noticed his regulator set at around 100#, I can only get mine up to aboue 65#. I may have to think about a new pump and keep my current one as a spare. Thanks for the input.\

Lenny

Link to comment
Share on other sites

The external stock pump for the 800cc & 1100s is only rated at 3 Bar and 115L/H. 3 Bar equals 43.51psi, however the fuel regulator is rated at 55psi so adjusts the pressure up & then on to the fuel rails at this factory setting. The upgrade external fuel pump (thanks to Art) is the Bosch 0 580 254 910 . It looks just like the stock pump with the same colour blue plastic wrap and it's the same size so will fit the stock bracket. It is however, an upgrade because the specs are 5 Bar (73.5psi) and 130L/H . Don't worry about the extra flow, that's feed back into the petrol tank.

I do see one major benefit for upgrading your fuel pump and just to quote from the Troopers owners manual "The temperature of fuel has a great influence on pump function. When working under high temperature for a long time, the pump pressure will drop rapidly if fuel temp. is over a certain value....." The Bosch 910 fuel pump will be able to cope better than the stock fuel pump in this saturation by having more fuel pressure.

So for you guys & gals riding around in the desert all day long and have experienced the engine missing, stopping or hard to start a hot engine, that could be why.

Kinarfi, could you put the Bosch 910 fuel pump in the Parts, Pieces, and Information for our Troopers please.

Cheers Mike.

The following site has good prices on these pumps. http://www.naautoparts.com/6.html?m8:cat=%...%2FFuel%20Pumps They sell 2 different ones, one is the original Bosch and the $59 one is idenical but made as an after market product. Specs are idenical. I went with the $59 one thinking that I won't be putting 100,000 miles on my Trooper. Knarfi, you might consider adding this site with it's lower cost option pump to the pinned parts list. Thanks

Lenny

Link to comment
Share on other sites

The following site has good prices on these pumps. http://www.naautoparts.com/6.html?m8:cat=%...%2FFuel%20Pumps They sell 2 different ones, one is the original Bosch and the $59 one is idenical but made as an after market product. Specs are idenical. I went with the $59 one thinking that I won't be putting 100,000 miles on my Trooper. Knarfi, you might consider adding this site with it's lower cost option pump to the pinned parts list. Thanks

Lenny

Man you guys are so lucky in the States to have the competition with retail stores to help drive the prices down and keep it real. The retail I paid for the Bosch over here was us$170 on special. I could of got 3 of the fuel pumps Lenny just got for that price. Good find Lenny so defiantly add this to the list Kinarfi

Cheers Mike.

Link to comment
Share on other sites

  • 3 weeks later...
can anyone tell me what fitting i need to get to go onto the pressure end of the pump? I got my new pumps the other day and the look identical just like we thought.

Take the fitting of the stock pump and use it. This pump does put out much better.

Lenny

Link to comment
Share on other sites

That appears to be set up for a Banjo Fitting. I googled "banjo fitting" and saw several, priced from 8 to 50 dollars, but I didn't know what size you need, so I'll let you do your own research. I suggest you at least take a look, but I was concerned with the amount of flow they could handle, but then, that is what they designed it for. Again, your choice.

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By LongSun
      I can not find it on the board, so I'm afraid I'm the only cheapo on the forum.
      What is the fuel economy of the Hisun HS590? (I guess it is the same as the HS550)
      I count in liter per 100 km, but if you use MPG it's okay with me, but please tell if you use the US or UK MPG!
    • By BuggyBoy
      Hi, 
      I'm in Australia and need to replace the footbrake pads and cable (weak point if you ask me, bad design), plus might as well get the main brakes done at the same time.
      Anyone know an Aus dealer, or, know the parts number or equivalent in the petrol version?
      Cheers.
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
×
×
  • Create New...