Quantcast
Jump to content


2021 Hisun Vector 700 accessory switch

scottr125

By scottr125
in Hisun UTV SxS Forum

 Share

Recommended Posts

  • Alex changed the title to 2021 Hisun Vector 700 accessory switch
  • 4 months later...
mharmon12 Newbie

mharmon12

Posted
Posted (edited)

I've got a 2020 HiSun Sector HS550 and I'd like to know the same thing.

There are 2 connectors in back under my tilt bed\box hanging by the shock absorber, one is gray and the other is black.

I suspect the accessory switch goes to these but I do not know for sure.
One connector has heavier wires than the other.

The connectors are Molex brand, MX150 series.
The black one is connector configuration A and the gray connector is key option B, part numbers 334812201 and 334812202, respectively.

I found the connectors listed on eBay as Harley.
 

I'll be waiting to hear what the accessory switch goes to or for an electrical diagram.
Meanwhile, I'm going to go see what powers these two plugs.

Thanks,
Mike H
Meridian, Idaho

Edited by mharmon12
Corrected engine size
aefron88 Community Regular

aefron88

Posted
Posted

Unfortunately my HS400 doesn't have the switch.

There may be a wiring diagram in the back of the service manual, check the coleman/hisun sections of the download page. I know some of the manuals have them, and also list what model of connector is used on each plug.

Or option two is you can use your multimeter and find out and let us know so that future searchers can find the info. Check voltage at the wires with the switch of and on and see what you get.

mharmon12 Newbie

mharmon12

Posted
Posted

Thank you Sir!
My manual doesn't have the schematic, I've reached out to a couple of HiSun dealers online and will see what comes back.

Meanwhile, I'll use a VOM to check those plugs out.
I do have a couple of male plugs coming from eBay for those, I hate cutting perfectly good connectors off just to splice in aftermarket equipment.

Thank you @aefron88 for your suggestion!

On another note, I noticed that the output of the engine casing on the passenger side being the seat has a rubber boot on it which points at the CAT for cooling.

There is no cover on it and where I park this in the mountains, mice will get in there to nest so I'll be fitting a screen to it to keep those nasty critters out.
It looks like something belongs there but a snorkel would be useless since the intake to the fan is below the output.
Plus I think it's used for cooling the CAT.
Do you have the same thing on your machine?

outlet.jpg

MX150_Black.jpg

MX150_Gray.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Prepper
      Which is the best oil to use ?
      By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       
    • Paul in Wisconsin
      Tracker 800SX sway bar
      By Paul in Wisconsin
      I have a 2023 Tracker 800SX LE that I want to add a sway bar to.
      The service manual shows how to remove and reinstall the sway bar.
      I called Cabela's to try and get the saw bar.   They said they can't get one and the 800SX doesn't have one!!??  Then why is it listed in the service manual?? No answer from them.
      Have any of you found a saw bar that fits and what did it cost?
    • Some random dude
      Hisun 700 won’t start due to Break switch
      By Some random dude
      2015 Hisun 700 Utv
      the break pedal seems to not fully throw therefore it won’t engage the switch in order to start. 
      it throws enough to stop the UTV but not enough to engage the switch. 
      I used it this morning, started fine, did some work then shut it off to talk to a neighbour and it wouldn’t start after. I can hear the injectors working but the break pedal doesn’t seem to go all the way down. 
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • Joseph Sills
      Panel Light Dimming ?
      By Joseph Sills
      Has anyone modified the panel lights so they can be dimmed ? I haven't found a wiring schematic for the display . 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...