Quantcast
Jump to content


Recommended Posts

Posted

I bought a new Kawasaki Mule pro-MX a few months ago.  I've only put 45 miles on it (been using it around my 20 acres) but it has gone through 30 litres which works out around 7mpg (UK).  This seems extremely poor, as I've read some people getting about 200 miles to the tank.  It's been used occasionally to pull some heavyish loads but mainly chugging around the fields helping with maintenance or giving rides to kids.  My fields are flat/grass with no hard terrain anywhere.

Does anyone know why the mpg is so bad, and should it improve after its first service?

  • Alex changed the title to New Kawasaki Mule pro-MX poor mpg
Posted

Wow! That's just under 1 liter per mile.  You should see a LOT of black smoke out the exhaust of that 2-cyl engine and maybe a rough running engine.  If you had an external leak in the fuel system that would be a very noticeable leak.  Being new, I would first check for a leakkng injector.   You can search for "poor gas mileage" and it will give you a few things to check.

  • Like 1
Posted

Check your oil, since it is fuel injected make sure that gas is not going in to the oil.  if your fuel pump or if it has a carburetor either way is stuck on then the fuel is going somewhere most likely the crankcase on on the ground.  If it has a carburetor then your needle and seat are not set right and fuel is flowing out as you drive, if it is fuel injection then the fuel pump is running  too high of fuel pressure and the fuel is going into the engine's crankcase.  Check your oil level and make sure gas is not getting into your crankcase.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
    • By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


×
×
  • Create New...