Quantcast
Jump to content

Do it yourself maintenance

Roadstar515

By Roadstar515
in Hisun UTV SxS Forum

 Share
Go to solution Solved by Roadstar515,

Recommended Posts

  • Solution
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
  • Solution
Posted

Just talked to Hisun and they said I could do the oil changes but to make sure I purchase the Hisun oil filter and use a good quality 10w40 wet clutch motorcycle oil. I new about the oil, but wanted to make sure about the filter. With that said by following that guideline, it won’t void your warranty if something happens during that period. I don’t like not being able to do my own maintenance.

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
19 hours ago, Roadstar515 said:

Just talked to Hisun and they said I could do the oil changes but to make sure I purchase the Hisun oil filter and use a good quality 10w40 wet clutch motorcycle oil. I new about the oil, but wanted to make sure about the filter. With that said by following that guideline, it won’t void your warranty if something happens during that period. I don’t like not being able to do my own maintenance.

 

I used Mobil 1 4T-10w-40 when I owned a Coleman (Hisun).  There was a noticeable improvement in the shifter and sound of the machine.

Oil filter was difficult to find.  Finally found one for the 550 on Amazon:

 

https://www.amazon.com/gp/product/B01N2UIZT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
18 hours ago, mcraigchr said:

image.thumb.png.6b8e9199ea4f00ee148d6590da7bfa22.png

Just happened to notice in my service manual the recommended oil weight is 10W30 and it doesn’t mention synthetic. I’m a firm believer in synthetic oils, seeing I use them in all my vehicles that call for that. I’m going to call Hisun and see what they say. I’ll let you know if your interested and if not no biggy 

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
52 minutes ago, Roadstar515 said:

Just happened to notice in my service manual the recommended oil weight is 10W30 and it doesn’t mention synthetic. I’m a firm believer in synthetic oils, seeing I use them in all my vehicles that call for that. I’m going to call Hisun and see what they say. I’ll let you know if your interested and if not no biggy 

 

IIRC, my manual also said 10-30.  Living in Texas (hot summers), I have always believed that stepping up in viscosity never hurts anything.  After 40+ years, I have never had an issue in any of my vehicles or toys.  But ultimately, it's your call.

Don't mean to be a negative nancy, but based on my experience, you will have other issues with your Hisun long before you have issues related to oil viscosity.

CC

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted

Oh no problem, I get it. I’m an Amsoil guy so I understand where your coming from. Buts that’s a whole different animal if you know what I mean. I had added another post about valve adjustment at 20 hours. Do you care to comment. And thanks for your input, I have an opened mind and willing to listen. This is how we all learn the good and bad. Just sorry I wasn’t on this forum earlier, I would have purchased something else for what I read, lol

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
51 minutes ago, Roadstar515 said:

Oh no problem, I get it. I’m an Amsoil guy so I understand where your coming from. Buts that’s a whole different animal if you know what I mean. I had added another post about valve adjustment at 20 hours. Do you care to comment. And thanks for your input, I have an opened mind and willing to listen. This is how we all learn the good and bad. Just sorry I wasn’t on this forum earlier, I would have purchased something else for what I read, lol

 

I never adjusted the valves.  I traded mine for a Kubota after 80 hours.  I did so because I had 3 lab reports run on the oil.  It was eating itself from the inside out.  I dumped it before I got stuck with a boat anchor.  My advice would be that you get the oil analyzed.  I use Blackstone Labs.  They will mail you a collection kit.  You mail it back to them.  You get a report that shows all of the details and he explains what they mean.

https://www.blackstone-labs.com/

CC

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted

Well that’s exciting news, NOT!!! Really not looking forward to that. Maybe if I run 10W30 it won’t happen (lol) just kidding. I’m still wondering if the valves really need to be checked like the book says or it’s just another way to get it in the shop for more revenue. My use for this machine is just to drive it around the neighborhood with the wife. It will probably never see dirt seeing I bought it for her. Don’t see us playing hard but it may not take that either from what I’m reading. We would have got a gas powered golf cart but they can’t make it up the inclines we have in the Georgia mountains

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
5 minutes ago, Roadstar515 said:

Well that’s exciting news, NOT!!! Really not looking forward to that. Maybe if I run 10W30 it won’t happen (lol) just kidding. I’m still wondering if the valves really need to be checked like the book says or it’s just another way to get it in the shop for more revenue. My use for this machine is just to drive it around the neighborhood with the wife. It will probably never see dirt seeing I bought it for her. Don’t see us playing hard but it may not take that either from what I’m reading. We would have got a gas powered golf cart but they can’t make it up the inclines we have in the Georgia mountains

 

Well, as my aunt always tells me "don't borrow trouble".  You may not have a lemon like I did.   Getting an oil analysis will protect at least some of your investment if it turns out to be a similar situation.  At least you will know that you need to take steps before it completely seizes up.  I wouldn't worry about the valves right now if it were me.  You would know if they were way out of whack.   Engine bogging down.  Loss of power when it warms up. etc.

I hope you have better luck than I did.

CC 

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
5 minutes ago, mcraigchr said:

 

Well, as my aunt always tells me "don't borrow trouble".  You may not have a lemon like I did.   Getting an oil analysis will protect at least some of your investment if it turns out to be a similar situation.  At least you will know that you need to take steps before it completely seizes up.  I wouldn't worry about the valves right now if it were me.  You would know if they were way out of whack.   Engine bogging down.  Loss of power when it warms up. etc.

I hope you have better luck than I did.

CC 

Forgot to ask you, what year was yours and size

Link to comment
Share on other sites
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Ermd ttk
      UTV Odes Ravager 1000cc - Strange noise from the back
      By Ermd ttk
      Hello friends,
      I got my ODES Ravager UTV yesterday and after a couple of hours of driving when I go downhill I heard a strange loud noise a couple of times, like a gear skipping or maybe something from the differential.
      It doesn't always happen and when it does it is heard for a few seconds and then it goes away and everything works normally, I'm worried if there could be some major malfunction or what could be the problem if someone can help me?
      Thanks a lot.
       
    • AlaskaTrail
      2021 Coleman UT400 - Transmission fluid change
      By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
    • nods
      2022 sector 750 GAS powered: Codes E-113, E-108, E-123, E-132, E-650. What are these?
      By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • moonrover
      Coleman 2022 UT 400 radiator thermo switch replacement question
      By moonrover
      Mine is overheated/burned/melt at connection with its wire connector, parts are ordered to replace both them.  This seems to be a common issue, and some of you already replaced it. I right now just connect the wires, so the fan runs  all the time whenever the initiation is on, but it's better let fan runs as needed with a working temperature sensor/switch. 
      Question: Does some coolant come out by removing the switch/sensor from radiator?  Or, is the threaded hole all the way inside radiator?   If the answer is yes,  I want to drain or extract  some coolant to make its level below the sensor before replacing it, so I don't make a mess with coolant spilled out 
      Thank you.  
    • REDfletching
      Seriously considering buying 2022 Axis 700 from Lowes… any regrets from current owners?
      By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...