Quantcast
Jump to content


Joe Breaux

Members
 View Profile  See their activity

  • Posts

    1,050

  • Joined

  • Last visited

  • Days Won

    108

 Content Type 

Everything posted by Joe Breaux

  1. Joe Breaux
    Anything?
  2. Joe Breaux
    Condolences on your purchase of a Massimo non warrenty new utv ..from another foolish buyer who made the same mistake
  3. Joe Breaux
    When you bleed the air does it have pressure? Your pump may not be pumping..I had to replace mine on Hisun 500 engine..also look at recovery bottle..see any air bubbles? If you do, its a gasket failure.
  4. Joe Breaux
    Verified thermostat is opening?
  5. Joe Breaux
    Try amazon
  6. Joe Breaux
    Seat belts are required here also....and the street tires .and liabilty insurance
  7. Joe Breaux
    I would suggest you check out a CF MOTO and compare
  8. Joe Breaux
    Look for aluminum...much lighter
  9. Joe Breaux
    That's a huge ring gap..maybe the rings are so soft they wore quickly? Or they were installed without checking which I would not be surprised by either. Hopefully with your proper assembly, it will run fine
  10. Joe Breaux
    I get my ATV and UTV filters on Amazon.
  11. Joe Breaux
    So it would seem
  12. Joe Breaux
    Mine does not have that feature..I never wear the belt
  13. Joe Breaux
    So..what did you buy?
  14. Joe Breaux
    I have a Massimo MSU 500. And a CF MOTO CF600...Trust me you will save money by spending the Xtra $1k. ..There is no comparison in the quality of the 2..I spent over $3k in the first year keeping the MSU 500 useable..I have had the CF600 for 2 1/2 yrs and have spent nothing but gas money..even my oil change was free from dealer..yes, dealer...there is one ..unlike Massimo selling at big box stores and refusing any warrenty claims..
  15. Joe Breaux
    In my opinion yes..QUALITY..I have a Massimo and I have a CF MOTO c force..there is no comparison . The CF is 5 times the quality
  16. Joe Breaux
    Checked for spark?
  17. Joe Breaux
    Good hunting
  18. Joe Breaux
    Mine is CVT trans too but still has a wet clutch. The CVT is belt drive between 2 sheave pullies that move in a nd out to change drive ratio to axles
  19. Joe Breaux
    I have dome that before too..but I was afraid the cheap filter would just tear if I did that. Then what? I just don't get why it was so tight. An 18 inch breaker and a 2ft pipe ? Dam that's tight.and I put it on myself, I oiled the seal first and put it on by hand, no wrench so wtf? Oh well ,it's done..
  20. Joe Breaux
    You guys see the Polaris recall of 22 to 25 utvs? Missing bolts in frame and roll bars..oops...probably not good if you jump or roll I would think...but that's just me...🤔
  21. Joe Breaux
    BTW. You didn't do that 1 1/2 extra qrs of oil thing did you? That could be the cause
  22. Joe Breaux
    If they will answer the phone..lol
  23. Joe Breaux
    You can tear top end off in frame but before you do all that, do a compression rest and leak down test to see if it's rings or piston damage or valve issues..what oil are you using? Too low viscosity will. Let oil get by. Crankcase pressure will too.. what does you oil look like? Black...milky? Clear? Unless you just want to refresh it. Find out why it's burning oil before you start wrenching.
  24. Joe Breaux
    There's a big reason they want them gone..And that warranty ain't worth the paper it's written on.
  25. Joe Breaux
    Just changed my oil in my MSU 500..boy it was dirty..it's dusty ,very dusty here when it doesn't rain. Used Actevo 10w40 JASO M2 wet clutch oil..manual says 2 qts but it took 2 1/2 qts to get it where I feel comfortable..Some shops recommend 3 qts or more but I just can't see it..crank spinning in oil can't be. Good

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...