Quantcast
Jump to content


Joe Breaux

Members
  • Posts

    985
  • Joined

  • Last visited

  • Days Won

    100

Everything posted by Joe Breaux

  1. Be sure to use a Wet Clutch safe oil..I use Castrol Actevo 10w30. Your differential does not need replacing this soon. Check your manual
  2. I would pull the spark plug and see if piston is moving. You might have a broken rod
  3. then with the underpowered engine, that might be the issue..Did it always do this or is it recent development? I guess it has a NO TOWING warning on it?
  4. Broken belt?
  5. Then why is it in Polish on my screen, but everyone else is in English? 🤔
  6. I don't need to translate ..we all use English here...you need to use it too or try a Polish UTV forum to ask for info
  7. Mine has Plexiglas that folds down in the middle..it's crap..the fold makes for poor visibility up or down and it's now so scratched up I can barely see thru it.
  8. Ok,that's in English.. How would you balance it? It would shake violently and what about the rod journals? Don't think it's even possible. Unless you are joking
  9. Dude. It's in Polish on my screen. The NO is in English tho
  10. It's in Polish on my phone..so I don't know what you posted..hence the ??
  11. whats with the Polish? sorry dont understand
  12. post is in Polish
  13. Say what
  14. 4K bucks? Jesus..are they charging $1000/ hr?
  15. Wouldn't t surprise me any. That's what they do, copy existing units cheaply .I know for sure my MSU 500 is an exact copy of a YAMAHA RHINO BUT built with cheap components.
  16. If starter won't engage and battery is hot , I would guess that wire must go to neutral safety switch
  17. On mine, the head was cracked causing it
  18. I would say no. Looking at my Massimo 500, the rear wheel is 2 inches wider than the front.
  19. Are you climbing hill in high gear?
  20. I dont know what else to suggest sorry
  21. Mine runs fine on 93 octane even when it's a few months old.I assume you checked for water in the fuel? ..maybe you just have a bad plug. Have you tried a different plug?
  22. maybe go one heat range hotter on the plug. 145 compression is good.. so valve train is working
×
×
  • Create New...