-
Similar Topics
-
By Phil S
I have a Massimo Buck 450 and last winter I had the snow plough added by my dealer. After about 15 minutes of ploughing the plough went down but would not lift up. Upon inspection, it appears that the winch is permanently in the free-spool. When you try to wind back in the spool just spins. It is out of warranty and upon looking at replacing I am not sure how I would go about it.
Has anyone had similar issues?
Has anyone replaced it with a new winch? is so what model and how was it installed?
Any help is welcomed.
-
By Nickie Watts
I have a Hisun Strike 1000 I have been trying to get going, it has only 39 hours on it, so I can only assume it has been sitting for a long time.
The issue is it is losing spark to both coils after 20-30 seconds of running, doesn't matter if it's WOT or Idle, it will shut down. What sends signal to the coils to fire? It has a crank sensor, I was thinking a CDI box, but I have not found one of those on the machine.
The rear end was busted on it when I got it, So I ordered a new one and installed it only to run into this problem. I can only imagine the problem has happened over it sitting so long and not being driven.
I originally thought it was a fuel problem, so I checked the injectors, throttle body, o2 sensors. Discovered the heating element in one of the o2 sensors was bad, so ordered both and also replaced both injectors just to be sure, then discovered it is only losing spark.
-
By Wilsobe17
I’m looking to add a lift kit for my 2018 Kawasaki Mule SX XC. Does anyone have a recommendation where to buy?
Im new with it. I don’t need to know how to out it together just some ideas on where to get it, how high, bigger tires possibly?
-
By chuck92308
Anyone having issues with drive belt squeal . Been to Bass Pro 3 times. Replaced drive clutch and belt . Noise started again after 15 minutes. Anyone have this problem
-
-
-
-
Gallery Images
.jpg.e3ec8b63cbe832be6ada8483cf70da21.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.