Quantcast
Jump to content


Recommended Posts

Posted

Dose any one know were I could get some doors, cab kit , plow, the 650 kit for the Ruesch. My dealer only can get the 650 kit. Would doors ect. for the Rhino or Ranger or something similar work for it?

Posted

Hi R95... glad to see someone here w/ a Ruesch. I would like to know how you like your machine? How long have you had it? Have you had any issues w/ it? I am considering adding these to my inventory, I'm already a Joyner dealer but am always looking for new products. Thanks in advance for any info you can provide. A.

Posted
Hi R95... glad to see someone here w/ a Ruesch. I would like to know how you like your machine? How long have you had it? Have you had any issues w/ it? I am considering adding these to my inventory, I'm already a Joyner dealer but am always looking for new products. Thanks in advance for any info you can provide. A.

I love mine! I have had my new one for 2 weeks but I just sold my old one that I have had since August to help finance the next one (panther 1000cc). I haven't had any real problems with either, just some carb tuning and a odd ignition which Ruesch set me for free under warranty. Those are only the two problems I have had. They were really easy to do, but I've been a mechanic for 10+ years and I'm used to fixing other toys. The motors for 2009 are made in Germany, not China. So there is something to help with sales. For the price of a Ruesch, you get long travel, wheels and tires, light bar in front, Fox shocks, and more for the same price of a Rhino or RZR. But long story short, I love my Ruesch, great quality, performance, looks, and price!

If you have any more questions, feel free to ask.

:D

  • 1 month later...
Posted

Sure, Try Rhino 660 2004-2006 Doors.

Remove foot bar and instal doors!

The Ruesch Side By side accepts many Yamaha / polaris Parts- accessories. And equally as nice many of the Ruesch upgrades work on a rhino!

  • 2 weeks later...
Posted
Sure, Try Rhino 660 2004-2006 Doors.

Remove foot bar and instal doors!

The Ruesch Side By side accepts many Yamaha / polaris Parts- accessories. And equally as nice many of the Ruesch upgrades work on a rhino!

cool thanks!

  • 1 month later...
Posted
Dose any one know were I could get some doors, cab kit , plow, the 650 kit for the Ruesch. My dealer only can get the 650 kit. Would doors ect. for the Rhino or Ranger or something similar work for it?

We are a Ruesch dealer in Arizona. We have developed a set of half doors for the Ruesch that works with the foot bars. Check them out on our web page. www.noisy-toyz.com

post-266-1250272112_thumb.jpg

  • 2 months later...
Posted
We are a Ruesch dealer in Arizona. We have developed a set of half doors for the Ruesch that works with the foot bars. Check them out on our web page. www.noisy-toyz.com

Cool, thanks!

  • 7 years later...
  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Skeeter22
      I going from a Yama Rhino and bought a 2026 Ranger 1000XP. I was riding and lost all steering. The steering wheel just spins freely. I have one other video of this happing but has anyone else experienced this.
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • By Alex
      If you’ve been looking for a chance to score a brand-new UTV, Polaris just launched one of the most unique giveaways we’ve seen in years.
      To celebrate America’s upcoming 250th anniversary, Polaris has announced its Celebrate American Heroes Giveaway, offering one lucky winner a custom-built Polaris RANGER CREW XD 1500 NorthStar 1776 Edition along with an all-expenses-paid trip to Nashville, Tennessee.
      The giveaway isn’t just about winning a side-by-side. Polaris is encouraging people to nominate someone they consider an American hero—whether that’s a veteran, first responder, teacher, volunteer, tradesperson, community leader, farmer, healthcare worker, or simply someone who makes a positive difference every day. Entrants can nominate themselves or someone else by sharing their story and submitting a photo.
      What’s Included?
      The grand prize is a highly customized RANGER CREW XD 1500 NorthStar 1776 Edition featuring:
      Exclusive 1776 commemorative graphics and badging Custom American-themed design package JBL 4200 audio system 50-inch LED light bar Rear winch Additional factory Polaris accessories All-expenses-paid trip for the winner and a guest to Nashville, Tennessee to receive the vehicle in person at the Polaris Dealer Meeting. According to Polaris, fewer than 100 of these special-edition 1776 models will be produced, making it one of the more unique RANGER builds we’ve seen from the factory.
      Why the RANGER XD 1500?
      The RANGER XD 1500 NorthStar sits at the top of the Ranger lineup and is designed for serious work and recreation. With its enclosed cab, heating and air conditioning, premium comfort features, and heavy-duty capability, it’s become one of the most talked-about utility side-by-sides in the industry.
      Whether you’re using a UTV on the farm, around your property, hunting, trail riding, or for work applications, the XD 1500 is one of the most capable utility machines Polaris has ever built.
      Entry Information
      The giveaway is open to eligible U.S. residents 18 years or older. Participants must submit their nomination story and photo through Polaris’ official entry page. Polaris is accepting entries through early July, with the winner receiving the vehicle at a special event in Nashville this August.
      https://www.polaris.com/en-us/off-road/sweepstakes/celebrate-american-heroes/
    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
×
×
  • Create New...