Quantcast
Jump to content


parts for massimo, hisun,etc in florida?

sxr951

By sxr951
in Hisun UTV SxS Forum

 Share

Recommended Posts

Jack Angel Newbie

Jack Angel

Posted
Posted

I've had to obtain parts through Massimomotors.com. They are in Texas. Some parts will come right away from them, while others come from shipped from overseas. I was able to get a few things off Amazon. I couldn't find anything locally that they wouldn't have to order, so I did it myself.

Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

Shouldn't double post.

 

Take bolt to a good hardware store. Use the nut/bolt thread guild they usually have. Match up the bolt. Don't try and force it in the tool.

 

Maybe www. Motor Cycle doctor .com may be able to help.

sxr951 Rookie

sxr951

Posted
  • Author
Posted

LOL.. your funny.. just go to a hardware store..lol  
 these bolts as i found out (after wasting alot of time at ace and calling bike shops) are "proprietary parts" which in this case means they have a runoff of odd threads or diameter or both . so you have to buy your integral parts from massimo. 

which is fine just wish i knew before .
 i'll prob drill out one bolt hole of its stainless insert and run a HELICOIL to 3/8 x 125 stainless bolt

Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted

Glad you found the bolts/studs/information you need.

May want to share the diameter and thread pitch with the rest of the community. In case someone else needs the info.

Stainless is fun to drill.

Personally, I wouldn't call Ace a good hardware store.

  • Like 1
Dale Stansbery Explorer

Dale Stansbery

Posted
Posted
13 hours ago, sxr951 said:

parts for massimo, hisun,etc in florida? where can i get parts for the massimo 700.. like bolts and console i  didnt see any bolts on amazon to go with cylinders and any thing when rebuilding a 700 engine 

Did you take a look at the parts diagram?...https://alpha-sports.com/massimo_parts.htm?q=massimo-parts  I suppose there may be a unique situation that only a 1 off bolt or screw may work, but everything I see on the parts diagrams are standard metric bolts. They are after all trying to minimize costs, and creating unique hardware hardly seems productive.

  • Like 3
sxr951 Rookie

sxr951

Posted
  • Author
Posted
10 hours ago, Dale Stansbery said:

Did you take a look at the parts diagram?...https://alpha-sports.com/massimo_parts.htm?q=massimo-parts  I suppose there may be a unique situation that only a 1 off bolt or screw may work, but everything I see on the parts diagrams are standard metric bolts. They are after all trying to minimize costs, and creating unique hardware hardly seems productive.

1...wow!! GOOD FIND! THX HEAPS! even has bolt thickness .to bad their all wrong..lol.
2....i got 8.07 mm  however i have two diff  10mm from ace and one will slide thru the head guide holes to the cylinder and one will not ,to thick.  . if i decide to tap  the cylinder block hole  out
3... more later thanks much

sxr951 Rookie

sxr951

Posted
  • Author
Posted

after i cleaned her up with baking soda blast the one pic can see where the head gasket was burnt thru leaking radiator water into the cylinder when i bought it from freak-a-zoids hill billys

454887556_7917847948291367_6305289850805403478_n.jpg

454743420_7917853988290763_4302612674702012_n.jpg

454398804_7889585414450954_2600049651863625418_n.jpg

Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted
On 8/10/2024 at 11:01 AM, sxr951 said:

1...wow!! GOOD FIND! THX HEAPS! even has bolt thickness .to bad their all wrong..lol.
 

Ya know, for someone that came here looking for help and information on how to repair their machine and locate parts. THEN spit in the face of people trying to help. Isn't a very friendly thing to do.

 

I couldn't give 2 shits if you fix this POS now.

Sincerely 

An Eastern Kentucky HILLBILLY.

  • Haha 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • AaronD1982
      Massimo Buck 400S UTV Stator......?
      By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • carbdoctor
      2023 massimo 850 eps overheating
      By carbdoctor
      I have an 850. It’s been overheating. The electric fan is not kicking on. I see the temperature switch going into the radiator, but there’s no wire plugging in to it or none to be found in the area. i’m thinking I might’ve hooked on a branch and it ripped out the harness on that part. Does anybody have a picture or no where that plugs into on the harness? On the top of the firewall, I did notice some plugs that have nothing plugged into it. I was wondering if it’s a harness that goes from there down to the radiator that was pulled off


    • Robert Hamilton
      Ruesch parts
      By Robert Hamilton
      i am looking for front brake calipers and brakes for my 2008 ruesch xr side by side
      Can anybody help me
      Thanks bob
    • Burk
      2021 Axis(Hisun) 700 Will not fire up
      By Burk
      I have a 2021 Axis(Hisun) 700 from Lowes. Will not start. Checked starter, solenoid, spark plug and fuel pump. Everything seems to be fine. The motor turns over and will try to start but just will not. Battery is also good. Frustrated!
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...